Potassium silicate glass and potassium silicate inorganic nano resin

What does potassium silicate mean? Potassium silicate Also known as potassium metasilicate. There are three kinds of it: 1K2SiO3=154.29; colorless crystal which is usually greenish or blocky. Its melting point at 976. It can be dissolved in water. Alkaline, insoluble in water and insoluble with ethanol. Acids decompose and produce silicic acids gel. It absorbs water in the atmosphere and deliquesces. 2 K2Si2O5=214.37. Colorless rhombic crystalline. The melting point is 1015 +-10 and the relative density is 2.556 (25/4). 3 K2Si4O9 *H2O=352.56, white homobic crystal. The relative density is 2.41. The temperature at which it can be broken down to 400 is sufficient. It dissolves in water, but is insoluble when ethanol. By heating potassium carbonate (or potassium hydroxide) with quartz sand, it can be prepared. It has strong alkaline and hygroscopic properties. Potassium Silicate can be easily decomposed in an acidic environment to precipitate silicon dioxide. Potassium Silicate is used in the manufacture of welding electrodes. The wide variety of uses for potassium silicate are evident. Potassium silicate elements are very similar to potassium feldspar. It's therefore important to learn how to make potassium silicate from potassium feldspar.


Produce potassium silicate glass
Step 1. : Combine tetraethyl orsilicate and water in a bowl and stir to make a homogeneous mixture. Mix the hydrochloric acid with KCl solution one at a time under stirring conditions. Make a mixture. Step 2 - Place the mix solution in the oven. At 200-300 degrees Celsius, place the crucible into the oven. Turn the oven to 500600. The oven should be closed after a constant temperature process for approximately 23 hours. It is safe to take out the pan after the half-finished potassium silicate product has been brought up to room temperature. It is now possible to make potassium silicate glasses. The glass has high purity, uniformity and requires very little production equipment.

High modulus potassium silicate organic nano resin preparation
Mixing raw materials with high-modulus potassium slicate inorganic inorganic nano resin is the final step in the preparation procedure. To mix raw materials, add low modulus potassium slicate aqueous solution, stirring to make an eddy, then add water and silica sol. Finally, add stabilizer, stabilizer, and coupling agents to turn the mixture into a uniformly mixed product. Prefabricated potassium silicate organic nano resin can be prepared by heating the mixture at 4080°C. Next, heat the mixture to 4080 degrees. After that, circulate the heated mixture in the reaction system. This includes a mixer, pump and high gravity rotating packed beds. You will get potassium silicate nano resin. It has a modulus of 5.36.2 and solid content at 26%30%. Particle size is 520nm, yield of 99.5%99%. This not only increases product quality and stability, but it also reduces reaction time and lowers energy consumption.

The price of potassium silicate
Price will depend on how large and pure the potassium silicate is. The purchase volume may also have an effect on its cost. Large quantities of small amounts will result in a lower price. On our official website, you can see the price for potassium silicate.

Potassium silicate supplier
Mis-asia Technology Co. Ltd. (Mis-asia), Luoyang City is a trustworthy and quality global chemical material manufacturer and supplier. This company is a trusted supplier of high quality chemical materials and nanotechnology products with more than 12 year experience, such as potassium silicates, nitride and graphite powders, sulfide and 3D printing powders. We are happy to provide high quality and economical potassium silicate. Get in touch Ask any question.

Inquiry us

Our Latest Products

Witconate NAS-88 Sodium Sulfonate CAS 5324-84-5

Sodium Sulfonate, a solubilizer, has low foaming, can remove protein stains and is wetting. It also inhibits corrosion. . Content: 36% About Witconate NAS-88 sodium sulfonate: Witconate NAS88 Sodium Sulfonate has rich and fine foam with low degre...…

Caprylamidopropyl betaine

ODAB-35 can be used with a variety of surfactants. These include amphoteric, cationic and nonionic. The foam is rich and beautiful, it is stable and has good solubilization. Caprylamidopropyl benzene: ODAB-35 can be used with a variety of surfacta...…

DSS-18A Disodium N-octadecyl Sulfosuccinamate CAS 14481-60-8

The foam does not change in height for a long period of time. DSS-18A Disodium Sulfosuccinate N-Octadecyl: DSS-18A is a disodium N-octadecyl Sulfosuccinamate with rich, fine foam. This product has low degreasing ability, minimal irritation of skin...…

0086-0379-64280201 brad@ihpa.net skype whatsapp