What is silicon powder?

Silicon Fume (Microsilica or Silica Fume), also called Microsilica Fume, is technically known as "Silica Fume". It is collected and treated by special collecting devices during the high-temperature smelting of industrial silicon and iron silicon by industrial electric furnaces. Microsilica or Silica Fume is a special collection device that collects and deals with the Fume emitted by industrial electric furnaces during the high-temperature smelting of industrial silicon and ferrosilicon. In the escaped soot, SiO2 content accounts for about 90% of the total soot, the particle size is very small, the average particle size is almost nano level, so it is called silica powder.

Anode Material Carbon-coated Silicon Powder

Properties of silicon powder
(1) Good insulation: due to the high purity of silicon powder, low impurity content, stable performance, excellent electrical insulation performance, so that the cured material has good insulation performance and arc resistance.
(2) it can reduce the exothermic peak temperature of epoxy resin curing reaction, reduce the linear expansion coefficient and shrinkage rate of the cured material, eliminate the internal stress of the cured material and prevent cracking.
(3) Corrosion resistance: silicon powder is not easy to react with other substances, and can not react with most acid and alkali. Its particles uniformly cover the surface of the object, and it has strong corrosion resistance.
(4) Reasonable particle size distribution, use can reduce and eliminate precipitation, stratification phenomenon; It can enhance the tensile strength and compressive strength of the cured material, improve the wear resistance, and increase the thermal conductivity of the cured material, increase the flame retardant performance.
(5) The silicon powder treated by silane coupling agent has good infiltration, good adsorption performance, is easy to mix, and no agglomeration phenomenon for all kinds of resins.
(6) Silicon powder as filler, added to the organic resin, not only improves the performance of the cured material but also reduces the cost of the product.
Silicon micro powder for electronic and electrical industry
Silicon powder for electronic and electrical industry (SJ/T10675-2002) product classification and code: used in the electrical industry, common silicon powder (PG), common active silicon powder (PGH), electrician grade silicon powder (DG), electrician grade active silicon powder (DGH). Used in the electronic industry, there are electronic grade crystalline silicon powder (JG), electronic grade crystalline active silicon powder (JGH), electronic grade molten silicon powder (RG), electronic grade molten active silicon powder (RGH). Product specifications for product mesh number, divided into 300, 400, 600, 1000 mesh.
Silicon powder Supplier
TRUNNANO (aka. Luoyang Tongrun Nano Technology Co. Ltd.) is a trusted global chemical material supplier & manufacturer with over 12 years of experience in providing super high-quality chemicals and Nanomaterials. Currently, our company has successfully developed a series of materials. The silicon powder produced by our company has high purity, fine particle size, and impurity content. Send us an email or click on the needed products to send an inquiry.

Inquiry us

Our Latest Products

Factory 3-5nm Nanodiamond Powder CAS 7782-40-3

Brief Introduction of Nanodiamond PowderProduct name: Nanodiamond PowderFormular: C Product NameNanodiamond PowderPurity 99%Particle Size3-5nmAnalysis ResultChemical CompositionAnalysis (%)Al0.0046%Co0.007%Si0.079%Na0.002%K0.00015%Ca0.003%Mg0.00058%...…

CAS No. 557-05-1 40% Water-based Zinc Stearate Zinc Stearate Emulsion

Product DescriptionProduct Description Description of zinc stearate emulsionZinc stearate emulsion is easy to disperse in water, has ultra-fineness, good dispersion compatibility. Zinc stearate emulsion has the characteristics of lubricating and deli...…

China factory cheapest price lightweight concrete wall panel making machine large hydraulic cement foaming machine equipment

Product performance of TR-40 Cement Foaming Machine1. The shell is made of high-strength precision thickened steel plate, painted twice, which is durable.2. The slurry output is uniform and stable, the density of the foam concrete finished product i...…

0086-0379-64280201 brad@ihpa.net skype whatsapp