What is Zirconium Silicide ZrSi2 Powder?

OPEC+ is likely to stick to its plan for a small increase in oil ZrSi2 Powder will continue to be influenced by the oil supply shortage.


Introduction to Zirconium Silicide ZrSi2 Powder
Zirconium silicide or zirconium disilicide, chemical formula ZrSi2, is a steel gray rhombic glossy crystal, the relative density is 4.8822. Zirconium silicide is insoluble in water, inorganic acid, and aqua regia, but soluble in hydrofluoric acid.
 

Physicochemical Properties of Zirconium Silicide ZrSi2 Powder
ZrSi2 as a zirconium-silicon intermetallic compound is a kind of ceramic material with high hardness, high melting point, high conductivity, high heat conductivity, and good thermal shock resistance to high temperature. Given the silicon zirconium - intermetallic compound has superior physical and chemical properties, ZrSi2 is a kind of structural material or new engineering material which can be used as the high-temperature corrosive medium. 
 

Zirconium Silicide ZrSi2 Powder Properties
Other Names zirconium(IV) silicide, zirconium disilicide, ZrSi2 powder
CAS No. 12039-90-6
Compound Formula ZrSi2
Molecular Weight 147.4
Appearance gray black powder
Melting Point N/A
Boiling Point N/A
Density 4.88g/cm3
Solubility in H2O insoluble
Exact Mass 145.858557

 

Zirconium Silicide ZrSi2 Powder CAS 12039-90-6
 

 

Preparing Methods of Zirconium Silicide ZrSi2 Powder
Zirconium silicide can be obtained from a mixture of zirconium powder and silicon powder at high temperatures under air isolation. 
 
A method for preparing zirconium silicide nanomaterial comprises the following steps: 
1. Add 5mmol zirconia, 5mmol silicon powder, and 50mmol lithium metal into a 20ml stainless steel autoclave and seal it. Then put the autoclave into an electric furnace capable of temperature programmed, set the heating rate of the furnace to 10 per minute, and heat the furnace to 600. The reaction is cooled naturally to room temperature and the autoclave is opened to remove the product which is black sediment. 
2. The reaction products were washed with distilled water, then respectively with dilute hydrochloric acid and anhydrous ethanol washing each time, after washing the product of the filter, then 60 in the vacuum drying oven drying 4 hours get zirconium silicide nanomaterials, based on the preparation of zirconium silicide nanomaterial quality and the quality of the raw material of zirconium dioxide used, it is concluded that the yield of zirconium silicide was 85%.
 

Applications of Zirconium Silicide ZrSi2 Powder
ZrSi2 can be used as fine ceramic raw material powder to make crucibles or semiconductor film.
 

Applications of Zr Zirconium
One of the most important applications of zircon is in the production of white pigment impervious agents for surface glazes and pigments in the tile and ceramic industries.  Refractory applications are also a common use of zircon in the manufacture of firebricks and shapes used in the steel and glass industries. Due to its high melting point (2200), zircalite is used as casting sand for molds and as "flour" for grinding, especially in warmer applications where it is important to maintain the surface quality of castings. The area of expertise known as "investment casting" is the growing use of zircon in the industry.  Zirconium is also used in the production of zirconia, zirconium metals, and zirconium chemicals.
 

Main Supplier of Zirconium Silicide ZrSi2 Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality zirconium silicide ZrSi2 powder, please feel free to contact us and send an inquiry. ([email protected])

 

Researchers at the University of Warwick in the UK have developed a lithium battery technology innovation. Adding graphene beams doubles battery life. By strengthening the structure of the anode with graphene beams, they have found an effective way to replace the graphite in the anode with silicon. Thereby increasing the capacity of the lithium-ion battery and more than doubling the lifespan.
As a supplier of anode materials for lithium batteries, we also provide ZrSi2 Powder. We will continue to provide ZrSi2 Powder for the global market, please feel free to contact us.


.

Inquiry us

Our Latest Products

Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets

About Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets:Chemical composition:…

Metal Alloy High Purity Tungsten Crucibles

About Metal Alloy High Purity Tungsten Crucibles:Chemical composition:…

Metal Alloy High Purity Tungsten Boat Evaporation Boats Of Tungsten

About Metal Alloy High Purity Tungsten Boat Evaporation Boats Of Tungsten:Properties: good conductivity, heat conduction, high temperature resistance, wear resistance and corrosion resistance.Applicat...…

0086-0379-64280201 brad@ihpa.net skype whatsapp