MIS-ASIA focus on the latest news on digital products, new material and machinery technology, innovations that happening around the world.

Mis-Asia provides the latest news on chemical products, nanomaterials, and concrete materials-related products. For example:

Zinc stearate, calcium stearate, sodium silicate, AOS、AES、Amorphous boron powder; Nanometer silicon powder, High purity graphite powder; Boron nitride; Boron carbide; Titanium diboride; Silicon hexaboride; Aluminum diboride; Nitinol powder; Molybdenum disulfide; Zinc sulfide; Ferric oxide; Manganese sesquioxide; Manganese dioxide; Spherical alumina; Spherical quartz powder; Titanium carbide; Chromium carbide; Tantalum carbide; Molybdenum carbide; Aluminum nitride; Silicon nitride; Titanium nitride; Molybdenum disilicide; Titanium disilicide; Zirconium disilicide; etc.


What are nanomaterials?

In nanotechnology, a particle is defined as a small object that behaves as a whole in terms of its transport and properties. It is further classified according to size: fine particles are between 100-2500 nm in diameter, while ultra-fine particles are between 1-100 nm in diameter. Similar to ultrafine particles, nanoparticles range in size from 1 to 100 nanometers, although size limits can be limited to a two-dimensional range. Nanoparticles may or may not exhibit size-dependent properties that differ significantly from those observed in fine particles or bulk materials.


Mis-asia is committed to technology development, applications of nanotechnology, and new material industries, with professional experience in nano-technology research and development and the application of materials.  If you need any information about the nano materials or if you are looking for them, please feel free to contact us. 

Send an email to brad@ihpa.net and we will get back to you in 24 hours.

High efficiency and relatively low-temperature process for preparation of nanosized Ti3AlC2 powder

What is Ti3AlC2?High-purity titanium aluminum carbide (Ti3AlC2) powders were synthesized by a microwave sintering method using different titanium sources as raw materials. The prepared products were characterized by differential scanning calorimetry ...…

Ti3AlC2 ternary compound with a layered structure in the hexagonal crystalline system

What is Ti3AlC2?Titanium Aluminum Carbide MAX Phase Micron-Powder. Chemical Name: Titanium Aluminum Carbide. Titanium aluminum carbide belongs to the hexagonal crystal system and: it has the same conductivity or heat conduction as metal but has the s...…

High purity Amorphous Boron Market

What is Amorphous Boron?Boron, with an atomic number 5 and denoted by the symbol B, is a metalloid element that is hard and highly heat-resistant. Boron has two allotropes in the form of amorphous and crystalline. High-purity Amorphous Boron powder i...…

The Use of amorphous boron powder

What is amorphous boron powder?Boron is well known as an advanced fuel in air-breathing propulsion systems due to its high gravimetric and volumetric heat value. This laboratory has developed a process at a pilot plant scale to prepare Amorphous Boro...…

Mn oxides have been exploited since ancient times

What is Manganese oxide?Manganese oxide minerals have been used for thousands of years—by the ancients for pigments and to clarify glass, and today as ores of Mn metal, catalysts, and battery material. More than 30 Mn oxide minerals occur in various ...…

Introduction of manganese dioxide

What is manganese dioxide?The type of manganese dioxide (MnO2) and its quantity used in dry cells are mainly responsible for cell capacity. Performance characteristics depend on individual crystal structure, varying degrees of hydration, and the acti...…

How are diamond Nanothreads made?

What is Diamond Nanoparticles?Diamond nanoparticles, or nanodiamonds (NDs), are single-crystal diamonds with carbon as the essential component with high physical and chemical properties. These are nanoscopic versions of sp3 carbon, while other carbon...…

Applications of Diamond Nanoparticles

What is Diamond Nanoparticles?Diamond Nanoparticles are high-surface-area carbon nanomaterials. Nanoscale Carbon Particles are typically 10 - 45 nanometers with a specific surface area in the 30 to 50 m2/g range and also available with an average par...…

Optimizing powder quality of 3D Printing Metal Powder

What is 3D Printing Metal Powder?The global 3D printing metals market is growing and expected to reach $3.05 billion by 2025, according to a recent report by Grand View Research, Inc. However, to take full advantage of this growth and efficiently pro...…

Applications of Ti6Al4V

What is Ti6Al4V?Ti6Al4V Titanium is a high-strength, low-density Ti alloy known for its excellent corrosion resistance. 6k Additive's Ti6Al4V spherical metal powders deliver excellent material properties that enable AM 3d metal print designers to tak...…

The NiTi powders were manufactured from the PREP process

What is NiTi powder?NiTi powder in cells culture with no growth inhibition. The medium's inductively coupled plasma (ICP) analysis also showed the separating rate in the different-size particles with the low separating rates of Ni and Ti. Although th...…

Thin Film Fabrication of Nitinol

What is Nitinol?The NiTi shape memory alloy called nitinol is composed of nickel and titanium in approximately equiatomic ratio. Thanks to its ability to get austenitic and martensitic structures by stressing or changing temperature, it possesses uni...…

0086-0379-64280201 brad@ihpa.net skype whatsapp