How serious are fertility problems today? People don't want to give birth,can't afford it, and can't give birth that has become the "three mountains".
The problem of childbirth is related to the people's livelihood. Whether a country can prosper or not depends on the population. I saw a set of data a few days ago. The data shows that on January 1, 1990, 2,784 babies were born in Shanghai. Ten years later, on January 1, 2000, 1,148 babies were born in Shanghai. In 2010, the number became 380. , 2020 only 156 people, the decline in the birth rate is shocking. The three most critical reasons are: I don't want to give birth, I can't afford it, I can't give birth! The decline of the global population will bring a series of economic and social problems, among which the demand for Hafnium Diboride will also be affected.
About Hafnium Diboride HfB2 Powder:
Hafnium boride is a gray crystal with a metallic luster. It has high conductivity and stable chemical properties. It hardly reacts with all chemical reagents (except hydrofluoric acid) at room temperature. It is prepared by mixing hafnium dioxide, boron oxide or boron carbide, carbon powder and heating, or by reducing hafnium tetrachloride and boron trichloride through hydrogen reduction at 2,000°C or directly reacting hafnium and boron. It is used as a high-temperature alloy.
Hafnium diboride has high melting point, high hardness, good electrical and thermal conductivity, and good neutron absorption performance. It has important applications in the fields of ultra-high temperature materials, superhard materials, electrode materials and neutron absorption materials.
With the development of material technology, the application fields of hafnium diboride ceramics and composite materials are becoming more and more extensive. Obtaining low-cost, high-quality hafnium diboride powder is currently an important research and development director at home and abroad. Hafnium diboride is difficult to sinter. In order to improve the sintering performance, it is necessary to obtain an ultrafine powder. Although nano-powder has superior performance, its cost is high, and it is difficult to disperse during raw material processing, and the process is more difficult. Therefore, the development of sub-micron hafnium diboride powder has been paid more and more attention.
Hafnium diboride belongs to the class of Ultra-high-temperature ceramics, a type of ceramic composed of hafnium and boron. It has a melting temperature of about 3250 °C. It is an unusual ceramic, having relatively high thermal and electrical conductivities, properties it shares with isostructural titanium diboride and zirconium diboride. It is a grey, metallic-looking material. Hafnium diboride has a hexagonal crystal structure, a molar mass of 200.11 grams per mole, and a density of ~10.5 g/cm³.
Hafnium diboride is often combined with carbon, boron, silicon, silicon carbide, and/or nickel to improve the consolidation of the hafnium diboride powder (sintering). It is commonly formed into a solid by a process called hot pressing, where the powders are pressed together using both heat and pressure. Feel free to send an inquiry to get the latest price if you would like to buy Hafnium Diboride HfB2 Powder in bulk.
Specifications of Hafnium diboride HfB2 powder:
Hafnium diboride powder MF: HfB2
Hafnium diboride powder CAS: 12007-23-7
Hafnium diboride powder EINECS: 234-500-7
Hafnium diboride powder Density: 10.5 g/cm3
Hafnium diboride powder Melting point: ~3250 °C
Hafnium diboride powder MOQ: 1kg
Hafnium diboride powder Particle size: nano, micro and as customers' request
Hafnium diboride powder Package: Aluminum bag,Vacuum packing, 1kg/bag, or as your request.
Features of Hafnium diboride HfB2 powder:
Hafnium diboride is an ultrahigh temperature ceramic composed of hafnium and boron. It has a melting temperature of about 3250 degrees Celsius. It is an unusual ceramic, having relatively high thermal and electrical conductivities, properties it shares with isostructural titanium diboride and zirconium diboride. It is a grey, metallic looking material. Hafnium diboride has a hexagonal crystal structure, a molar mass of 200.11 grams per mole, and a density of 10.5 grams per cubic centimeter.
How is Hafnium Diboride HfB2 Powder produced?
The combustion synthesis method of high-purity hafnium diboride powder is realized according to the following steps:
1. Mix the basic raw materials and diluents. The basic raw materials include hafnium dioxide, boric anhydride and magnesium powder. The percentages by weight are: hafnium dioxide: 30% to 60%, boric anhydride: 10% to 40%, magnesium powder ：15%～50%, the weight of the added diluent hafnium diboride is 0～3 times of the basic raw material;
2. Drying and mixing;
3. Load the uniformly mixed raw material powder into a graphite boat, and then put it into a closed pressure vessel. The closed pressure vessel is cooled by circulating water, and the reaction is maintained under a protective atmosphere with a pressure of 0-5Mpa or under vacuum conditions. The raw materials are self-propagating combustion and transformed into products;
4. Take out the product after cooling. The product is a mixture of hafnium diboride and magnesium oxide. The magnesium oxide is removed by acid washing, and then the hafnium diboride is washed with water, filtered and dried to obtain hafnium diboride powder.
Applications of Hafnium Diboride HfB2 Powder:
Hafnium diboride is used in wear-resistant coatings. Its use has also been looked at for use in ultra-high-temperature composites in conjunction with silicon carbide (SiC), due to its excellent refractoriness. The addition of silicon carbide improves its oxidations resistance.
The oxidation resistance of hafnium diboride is dependent on the temperature and pressure. At a temperature of 1500 °C and 1 atm of pressure, a protective oxide scale of hafnia forms. When temperatures rise above 1600 °C and pressures drop below 1 atm, the oxidation resistance of HfB2 is dramatically reduced. Under these conditions, the boiling temperature of B2O3 (one of the oxidation products of HfB2) is exceeded and the protective oxide layer.
The material has potential for use in hypervelocity reentry vehicles such as ICBM heat shields or aerodynamic leading-edges, due to its strength and thermal properties. Unlike polymer and composite material, HfB2 can be formed into aerodynamic shapes that will not ablate during reentry.
Hafnium diboride is also investigated as a possible new material for nuclear reactor control rods.
Hafnium diboride is also being investigated as a microchip diffusion barrier. If synthesized correctly, the barrier can be less than 7 nm thick.
Storage Condition of Hafnium diboride HfB2 powder:
Damp reunion will affect HfB2 powder dispersion performance and using effects, therefore, hafnium diboride HfB2 powder should be sealed in vacuum packing and stored in cool and dry room, the hafnium diboride HfB2 powder can not be exposure to air. In addition, the HfB2 powder should be avoided under stress.
Packing & Shipping of Hafnium diboride HfB2 powder:
We have many different kinds of packing which depends on the hafnium diboride HfB2 powder quantity.
Hafnium diboride HfB2 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Hafnium diboride HfB2 powder shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for hafnium diboride, please feel free to contact us and send an inquiry, email address: firstname.lastname@example.org
Hafnium Diboride Properties
|Other Names||hafnium boride, HfB2 powder|
|Melting Point||3250 °C|
|Solubility in H2O||N/A|
Hafnium Diboride Health & Safety Information
The Hafnium Diboride industry has experienced demand expectations driven by the rise and the off-season tired stock driven by the seasonal decline in two rounds of the market. Affected by the COVID-19 epidemic and other factors, inventories of manufacturers continue to accumulate, putting pressure on market sentiment. In addition to off-season factors, the weak trend of Hafnium Diboride also reflects the market's concern about the epidemic and some other related enterprises' financial situation.
15+ years of experience
Over $50+ million in sales
14+ years of experience
Over $50+ million in sales
Item No.: Tr-C High purity graphite powder flake graphite is natural crystalline graphite, which looks like fish phosphate, belongs to the hexagonal crystal system, and has good high-temperature resistance, electrical conductivity.Purity: 99…
Item No.: Tr-Cr02 Chrome chip hard and brittle steel gray bright metal with hardness like corundum and lower melting than platinumPurity>99.95%Product name: chromium flake…
About Succinate monoglycerides:Milky powder, insoluble in cold water, can be dispersed in hot water and hot grease.TRUNNANO is a trusted global Succinate monoglyceride. Feel free to send an inquiry to...…