Mis-asia | Ceramic powder, graphite powder,boron powder, and 3D printing metal Nanomaterial supplier & Manufacturer.

What is Tin diulfide ?? Tin deulfide Is an inorganic compound having a chemical composition of SnS2. It's a yellow hexagonal flake that has a CdI2 structure. It's difficult to dissolve in water. However, it is easily soluble and soluble with aqua regia, hot alkaline solution and sodium sulfide solutions, which are often used for golden paint.
Tin disulfide dissolves in warm alkali solution and aqua regia. You can mix it with ammonium-sulfide for dissolution.
How to prepare Tin Disulfide
Combining tin with sulfur in the presence iodine can produce tin disulfide. This reaction needs heating.
Sn + 2 SnS2
A second method is to add hydrogen sulfide to the tin salt (IV), or solution of tin salt (IV), and then precipitate.
Electrochemical behavior multi-walled nanotubes made of carbon confined with tin disulfide used as a negative electrode in lithium ion battery
Multi-walled, confined carbon nanotubes with metal tin nanostructures was prepared using the direct current plasma method (brad@ihpa.net). The precursor was then heated in a methane atmosphere and brad@ihpa.net were made by the sulfurization reaction. Raman, Xray diffraction (XRD) and transmission electron microscopic (TEM) results showed that multi-walled, carbon-containing nanotubes were about 400 nm in length, had a surface carbon layer of approximately 10 nm and were well crystallized. Sn brad@ihpa.net Nanostructures are used as anode material in lithium-ion battery. They show surprisingly good electrochemical performances. With 50 cycles of charging, the initial charge-discharge Coulomb efficiency reached 71%. After that, it maintained 703 mAh.g-1. Brad@ihpa.net Nanostructured Electrodes have high capacities due to the variety of active materials that provide this capacity, but each material has a different reaction platform.
Study on electrochemical performance of tin disulfide/single-walled carbon nanotube composite material used as anode material for lithium-ion battery
The simple solvothermal process allowed for the creation of a composite material made from SnS2 (SWCNTs), and single-walled, carbon nanotubes. The material has good electrochemical performances after it is applied to the battery's negative electrode. The reversible special capacity is still maintained at 510 mAh/g even with a 1 A/g current density after 100 cycles. To compare, the same procedure was used to synthesize an SnS2 compound and then conduct electrochemical analyses on it. The SnS2 material has a relatively high specific capacity, but it is slow in decaying after just 20 cycles. It is thought that the SnS2 component and SWCNTs combine to produce the composite material with superior lithium-ion performance.
Tin disulfide Supplier
(aka. Technology Co. Ltd. (aka. Our company currently has a number of products. Our Tin Disulfide has high purity, small particle sizes and low impurity. To get the current price of Tin diulfide send us an enquiry or send an email.

Inquiry us

Our Latest Products

Factory 3-5nm Nanodiamond Powder CAS 7782-40-3

Brief Introduction of Nanodiamond PowderProduct name: Nanodiamond PowderFormular: C Product NameNanodiamond PowderPurity 99%Particle Size3-5nmAnalysis ResultChemical CompositionAnalysis (%)Al0.0046%Co0.007%Si0.079%Na0.002%K0.00015%Ca0.003%Mg0.00058%...…

CAS No. 557-05-1 40% Water-based Zinc Stearate Zinc Stearate Emulsion

Product DescriptionProduct Description Description of zinc stearate emulsionZinc stearate emulsion is easy to disperse in water, has ultra-fineness, good dispersion compatibility. Zinc stearate emulsion has the characteristics of lubricating and deli...…

China factory cheapest price lightweight concrete wall panel making machine large hydraulic cement foaming machine equipment

Product performance of TR-40 Cement Foaming Machine1. The shell is made of high-strength precision thickened steel plate, painted twice, which is durable.2. The slurry output is uniform and stable, the density of the foam concrete finished product i...…

0086-0379-64280201 brad@ihpa.net skype whatsapp