What is zirconium hydride?

What is zirconium hydride?
The chemical formula of zirconium hydride is ZrH2, the density is 5.6g/cm3, and it decomposes before melting to generate heat of -39.7kcal/mol. Its preparation method is the same as that of titanium hydride, and the hydrogenation reaction temperature is usually 900 ℃.
How to prepare zirconium hydride?
The preparation method of zirconium hydride is the same as that of titanium hydride, and the temperature of the hydrogenation reaction is often carried out at 900°C. It is a stable powder, stable to air and water under normal conditions. It can react violently with oxidants and strong acids. It can burn smoothly when ignited. It starts to decompose at 300°C in a vacuum and completely decomposes at 500-700°C.
What is the use of zirconium hydride?
Zirconium hydride is used in industry for fireworks, fluxes, and igniting agents, as a moderator in nuclear reactors, as a getter in vacuum tubes, and also in metal-ceramic sealing.
Titanium hydride and zirconium hydride have been produced and supplied in tons in the industry, but they are mainly used for military purposes.

Preparation of Aluminum Foam with Small Pore Size by Zirconium Hydride Melt Foaming Method
Using ZrH_2 as the foaming agent, the aluminum-based small-pore aluminum foam was prepared by the melt foaming method, and the preparation process and the factors affecting the pore structure were analyzed; the process conditions for preparing the foam aluminum in the laboratory were optimized; the pattern analysis method was used to characterize the foam aluminum The pore size distribution is compared with the aluminum foam prepared by TiH_2; the wetting behavior of aluminum alloy and hydride is studied by using an improved pedestal drop device. The results show that ZrH_2 is more suitable for preparing small pore aluminum foam; the optimized process conditions are: Al 650 g, The addition amount of the tackifier Ca is 2.5%, the addition amount of the foaming agent ZrH_2 is 1.0%, the foaming temperature is 680 ℃, the stirring time is 1.5 min, and the holding time is 2.5 min; the prepared aluminum foam has a uniform pore size, and the average pore size is less than 1.5 mm; The wetting characteristic of ZrH_2 in the aluminum alloy is the main reason for the smaller pore size of aluminum foam.
zirconium hydride Supplier
TRUNNANO (aka. Luoyang Tongrun Nano Technology Co. Ltd.) is a trusted global chemical material supplier & manufacturer with over 12 years of experience in providing super high-quality chemicals and Nanomaterials. Currently, our company has successfully developed a series of materials. The zirconium hydride produced by our company has high purity, fine particle size, and impurity content. For the latest price of zirconium hydride, send us an email or click on the needed products to send an inquiry.

Inquiry us

Our Latest Products

C1618P Alkyl C16-18 Alcohol Phosphate Cetostearyl Alcohol Phosphate

It is important to use phosphoate ester, as an emulsion stabiliser in spinning fabrics under conditions of high alkalinity. C1618P C16-18 alcohol phosphate is also known as C1618P C1618P alkyl C16-18 alcohol phosphate C1618P C16-18 Alcohol Phospha...…

Dimethyl distearylammonium chloridel

Dimethyl distearylammonium has many different properties including softness and static electricity. Dimethyl distearylammonium chloride Dimethyl distearylammonium Chloride is characterized by its rich and fine foam. It has a low degreasing capacit...…

IAEC-10nH Isomeric alcohol ether carboxylate, 86-90%

Isomeric alcohol carboxylate is resistant to strong acids, strong alkalis and electrolytes.Solid Content: 86-90% About Isomeric Alcohol Ether Carboxylate Isomeric alcohol carboxylate is resistant to strong acids and alkalis; it also has a high me...…

0086-0379-64280201 brad@ihpa.net skype whatsapp