Tuesday, May 28, 2024
nanotrun.com
HomeBloghow to make graphene on copper foil

how to make graphene on copper foil

Graphene is a unique material that has gained popularity in recent years due to its exceptional properties, such as high strength and conductivity, low cost, and flexibility. Graphene has the potential to revolutionize a variety of industries and applications, including electronics, energy storage, and drug delivery systems. However, making graphene on copper foil can be a challenging process that requires specialized equipment and expertise.


how to make graphene on copper foil

(how to make graphene on copper foil)

To make graphene on copper foil, you will need the following materials:

* Copper foil: The copper foil will be used to transfer the graphene from the substrate to the surface.
* Pore-forming agent: A pore-forming agent will be used to create tiny holes in the copper foil that allow the graphene to grow into them. This can be done using chemicals or other methods.
* Graphene sheet: You will need a graphene sheet to transfer onto the copper foil.

Here’s how to make graphene on copper foil:

1. Prepare the copper foil by cleaning it thoroughly and then applying an ultrasonic bath to remove any dirt or debris. This will help ensure that the graphene adheres evenly to the surface.
2. Apply a small amount of a thin layer of the pore-forming agent to one side of the copper foil. The amount will depend on the size and type of graphene sheet you want to use. Use a pipette to spread the pore-forming agent evenly over the surface.
3. Place the graphene sheet on top of the pore-forming agent and press it firmly to adhere to the copper foil. Be sure to press it firmly enough so that it covers all of the pores created by the pore-forming agent.
4. Allow the graphene to dry for several hours or overnight. This will allow the pores to form around the edges of the graphene sheet and bond to the copper foil.
5. Once the graphene is dry, remove it carefully from the copper foil using a wire brush. Use a fine-meshed spatula to carefully lift off the graphene sheet without damaging it.


how to make graphene on copper foil

(how to make graphene on copper foil)

6. Use a flat surface, such as a piece of paper, to gently。
Inquiry us




    RELATED ARTICLES
    - Advertisment -
    nanotrun.com

    Most Popular

    Recent Comments