High Quality EBS Ethylene Bis Stearamide Emulsion

EBS Ethylene Bis Stearamide Emulsion White is a clear emulsion. It is safe for the environment, is not toxic, isn't polluting and is non-hazardous. This product can be used to make inks, paints, and leather coatings. Particle size: D50: =2mm

Product name: Ethylene bis stearamide emulsion

Formula: C38H76N2O2

Products property This product was produced using modern technology. The appearance of the product is white emulsion. This product is not toxic, polluting, hazardous, or harmful to the environment. The product is very easy to disperse into water. It has a low viscosity and ultra-fine texture.

EBS Ethylene bis Stearamide Emulsion :
EBS Ethylene Bis Steramide is a cream-colored lotion. Ebs Ethylene Bis Steramide, a high-melting point white wax with a very hard melting point, is nontoxic. The industrial products have small yellow particles. They are stable in water and acid-base solvents. This powder contains soluble hydrocarbons as well as aromatic hydrocarbon solvents. The compound has wettability in water of 80°C or more.
EBS stands for Ethylene-bis Steramide. This synthetic wax has a high melting point and is highly compatible with most thermoset thermoplastics. The best pigment dispersants for the finished product are the outer and lubricants.
Ebs Ethylene Bis Steramide lubricant is new and widely used in PVC products. The stearate has a better internal lubrication and external lubrication that lubricants, like polyethylene wax. Plastic molding is improved by the fluidity of the fused plastic. The result is a higher yield in plastic processing, reduced energy consumption, and a product with incredibly smooth surfaces. Send an inquiry for the most current price to purchase bulk EBS Ethylene Bis Stearamide Emulsion.

Ethylene Bis stearamide emulsion properties:
EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe, effective, environmentally-friendly, and non-toxic. It can be easily dispersed in water.

It is simple. EBS Ethylene Bis Stearamide produced?
You can divide EBS's synthesis technique into 4 routes.
Combining stearic acid and amine compounds
Reacting with an amine compound to the stearate react is called "stearate"
The hardy amine and chloride compounds are not recommended.
Hydrolysis of the nitrile.
First and second are most common. The first is the most common. It is straightforward, requires no reaction conditions, has three disruptions but is low in purity. Although the EBS is large, it causes high energy consumption, is lengthy, is complicated, and takes long to complete.

Use of EBS Ethylene Bis Stearamide Emulsion :
EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe, effective, environmentally-friendly, and non-polluting. It can be easily dispersed in water.
1.Plastic
There are many types of thermoplastic and thermoset polymers that can be used as sliding agents. These include ABS, PS and AS. They also come in PP, PVAC and Cellulose. Accurate, Nylon, and PP. Amino plastic, Phenolic resin, and others have excellent finishes.
An auxiliary agent can also be used as an internal release agent in thermoplastic PUR molding. The amount of the agent is between 0.1 and 1%.
Polymethylene gulf agents add 0.5% of additional, increasing melt flow rates and whiteness. The thermal stability and physical indicators for polyoxymethylene also increase.
2. Rubber
EBS, synthetic rubbers and polychloroprene (SBR), add 1 to 3 percent EBS to their emulsion. They have excellent anti-sticking and antiblocking abilities. EBS is also applied to automotive flooring mats, drain pipes, and other rubber products. This gives them a higher surface gloss.
3. Chemical fiber
EBS increases the heat resistance, fluidity, and antistatic properties of polyamide, polyester, and other fibers.
4. Type
Casting sand can be added to a phenol-based resin in order to include EBS as an example agent.
5. Pigment, filler dispersant
EBS can be used as a plastic. Chemical fiber parent: ABS, PS. Polypropylene. Polyester pellets.
EBS can be used to color plastics with a spread of powdered EBS.
The pigment filler amount determines how much is added.
6. Powder coating
EBS can also be used to aid in the preparation of powder coatings.
7. Coatings and inks
To improve the performance of paints and paints, you can add 0.5% - 2% EBS.
You can use it in furniture polishing agents or printing inks.
8. Uses other than those listed
The melting point of petroleum products
The use of lubricants and corrosion inhibitors in metal wire; the use of potting materials to protect electrical components.
Below the papermaking agent, and above the paper coating components
You can dye textiles with a dyeing engineer defoamer, or as a permanent dyeing agent.
You can add this product to asphalt. This will lower the asphalt's viscosity and improve its weather and water resistance.

Technical Information of Ethylene bis Stearamide Emulsion

Product EB-20
Solid content. % 20+-2
Cps, viscosity <=100
Particle Size D50 <=2um
PH 7-9

Shipping and Packing of Ethylene bis stearamide emulsion
Different types of packing are available depending on Ethylene Bis Stearamide Emulsion quantities.
Ethylene Bis Stearamide Emulsion packing: 25kg/barrel
Ethylene Bis Stearamide Emulsion shipping: Could be sent by sea or air as soon as possible after receipt of payment.

EBS Ethylene Bis Stearamide Emulsion Properties

Other Titles 1,2-Bis(stearoylamino) ethane N,N'-1,2, Ethanediylbisoctadecanamide,
N,N'-Ethylenedi(stearamide), Ethylene distearylamide
N/A
Compound Formula C38H76N2O2
Molecular Weight 593.038 g*mol-1
Appearance Crystals of white, waxy color
Melting Point 144°C to 146°C
Solubility In Water N/A
Density N/A
Purity N/A
Particle Size D50: <=2mm
Boling Point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact N/A
Monoisotopic N/A

EBS Ethylene Bis Stearamide Emulsion Safety & Health Information

Safety Notice Alert
Hazard Statements H315, H319, H335
Flashing Point 280 degC
Hazard Codes T
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information N/A
WGK Germany N/A

Inquiry us

Our Latest Products

Factory 3-5nm Nanodiamond Powder CAS 7782-40-3

Brief Introduction of Nanodiamond PowderProduct name: Nanodiamond PowderFormular: C Product NameNanodiamond PowderPurity 99%Particle Size3-5nmAnalysis ResultChemical CompositionAnalysis (%)Al0.0046%Co0.007%Si0.079%Na0.002%K0.00015%Ca0.003%Mg0.00058%...…

CAS No. 557-05-1 40% Water-based Zinc Stearate Zinc Stearate Emulsion

Product DescriptionProduct Description Description of zinc stearate emulsionZinc stearate emulsion is easy to disperse in water, has ultra-fineness, good dispersion compatibility. Zinc stearate emulsion has the characteristics of lubricating and deli...…

China factory cheapest price lightweight concrete wall panel making machine large hydraulic cement foaming machine equipment

Product performance of TR-40 Cement Foaming Machine1. The shell is made of high-strength precision thickened steel plate, painted twice, which is durable.2. The slurry output is uniform and stable, the density of the foam concrete finished product i...…

0086-0379-64280201 brad@ihpa.net skype whatsapp