What is foaming agent?The foaming agent is an indispensable component in the preparation of foam concrete by using prefabricated foams. This study used four types of foaming agents to prepare foam concrete. Effect of the foaming agent on the properti...…
Preformed foam from the synthetic foaming agent was added into the geopolymer paste in various ratios of geopolymer paste to the foaming agent volume of 1:0.50, 1:0.67, 1:0.75, 1:1.00, 1:1.33, 1:1.50, and 1:2.00. Formerly, the foaming agent was perfo...…
Hardjito et al. stated that the F class of fly ash as the starting material was suitable for a geopolymer synthesis. Still, in this research, the fly ash used was classified as class C with a high content of CaO (more than 8% weightage). Several stud...…
The cement foaming agent (also known as foaming concrete agent) is an admixture which can lower the surface tension of liquid to produce large amounts of uniform, stable foam that can be used in the manufacture of concrete. Definition of concret...…
Concrete Foaming Agent Lightweight Concrete Solutions,Concrete Admixtures,,…
Concrete foaming agents are substances which increase concrete's density. These agents improve the flow of the concrete mixture and fill in any voids. These compounds can be used to reduce the cement needed for concrete. They do however lower the con…
The filling elevation of the foam light soil with different strengths shall be constructed in strict accordance with the design requirements. The anti-seepage geomembrane on the top of the foam light soil subgrade shall be laid under the metal mesh,…
Foamed concrete is to fully foam the foaming agent diluent by mechanical means through the foaming system of the special equipment for foamed concrete, and evenly mix the foam with the cement slurry, and then conduct in-situ construction through the…
The properties of the cellular concrete are strongly influenced by the type of foaming agent used.…
Foam stabilizer, also known as concrete foam stabilizer, is the most important foam stabilizing component in the foam agent. Among the various factors that stabilize the foam, the foam stabilizer is the first influencing factor. It is usually added t…
Lightweight concrete, also known as foam concrete, is to fully foam the foaming agent mechanically through the foaming system of the foaming machine, mix the foam and cement slurry evenly, and then pass the pumping system of the foaming mach…
What is Fumed silica?Fumed silica (pyrogenic silica and silicon dioxide) is one of the lightest substances known. Fumed silicas are very light and fluffy and have bulk densities of 3 lbs/cu ft (38 kg/cu m). Silicon metals and alloys are produced in e...…
Graphene is an allotrope of carbon, consisting of a single layer of atoms arranged in a two-dimensional honeycomb lattice nanostructure.…
There are two types of BN materials in boron nitride (BN) ceramics: hexagonal and cubic structures. The hexagonal boron nitride crystal structure has a similar graphite layered structure, presenting a loose, lubricating, easily hygroscopic, lightweig...…
0086-0379-64280201
brad@ihpa.net
skype
whatsapp