Trending

E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

Newsmis-asia

page2_Hollow glass powder_Leading local media on chemical materials, nano-ma
  • The energy consumption required to manufacture HOLLOW GLASS MICROSPHERES POWDERs, as described in Examples 1-4 of U.S. Patent No. 4,391,646 (Howell), can range from about 8 to about 50 kW-h per kg of product made. While commercial processes operating at a larger scale are more efficient, they still tend to use more than 5 kW- h per kg of product. Provided here are improved energy-efficient processes for producing HOLLOW GLASS MICROSPHERES POWDERs having high strength-to-density ratios compared w Attempts to form monocellular HOLLOW GLASS MICROSPHERES POWDERs from a feed comprising a blowing agent using electrical furnaces were not successful because the short residence times used in a flame-forming process could not be attained. That lack of control on the time scale means that forming conditions can only be optimal for a part of the particle size distribution, so HOLLOW GLASS MICROSPHERES POWDER yields tend to be low. To overcome the delicate balance between glass melt viscosity and pr Hollow glass microspheres ("HOLLOW GLASS MICROSPHERES POWDERs"), also referred to as "glass bubbles," are balloon-like glass structures having a median diameter of fewer than 500 micrometers. HOLLOW GLASS MICROSPHERES POWDERs are currently made using a process where a milled glass powder (or "glass frit") that contains a suitable blowing agent is flame-heated to temperatures at which the glass begins to soften. At these temperatures, the blowing agent either becomes or produces a gas, causing th The evolution of the tensile strength, the tensile modulus, and the elongation at the break of the three samples. Firstly, it is necessary to say that the results of the tensile test following those reported by other authors for the neat PA2200 [16,18]. Secondly, the tensile modulus of PH-1 and PH-2 is much higher than that of neat PA2200. As Fig. 3 shows, the neat PA2200 has the highest tensile strength and the best ductility, which are 47.63MPa and 17.56%, respectively. Overall, although the t Regarding the thermal information obtained from DSC analysis, Table 3 shows a single melting peak, Tm, around 185℃ belonging to the three materials' γ-crystal phase of polyamide. Similarly, the crystallization peak, Tc, coincided at ∼140℃for all materials. The sintering window, defined as the difference between endothermic and exothermic peak temperatures, ranged around 40℃ for the two composites, asseverating the suitability of PH1 and PH-2 for the SLS process. Tm and Tc values are increased wh The matrix material PA2200, with an average particle size of 60μm and a white appearance, was obtained from EOS GmbH in Germany. Moreover, the mixing ratio of new and old powder is 1:1. Filler additives, Hollow glass powder was surface treated with silane coupling agent supplied by The Minnesota Mining and Manufacturing(3M) Company in the USA. As an inorganic material, Hollow glass powders have no polarity and poor compatibility with PA2200. Thus, the mechanical properties of sintered parts of P Hollow glass powder (HGM), mainly composed of borosilicate glass, is an important inorganic filler with low density, high-temperature resistance, good fluidity, heat insulation, and good thermal stability. Through surface modification, HGB is applied to produce the composites, consequently improving properties. The improvements are in physical properties, such as tensile strength, elasticity modulus, dimensional stability, heat distortion temperature, and low density. More previous studies on th Selective laser sintering (SLS) to prepare composites by adding filler into the polymer effectively saves costs and reinforces the sintered parts. This article investigated the fabrication of PA2200 composites filled with different volume fractions of Hollow glass powder (HGM) by SLS. HGM was prepared by silane coupling agent surface treatment. The particle size distribution, microstructure, and thermal and mechanical properties of PA2200/HGM composites were studied by scanning electron microsco What is Hollow glass powder?The hollow glass powder is a micron-sized hollow glass microsphere with a smooth surface. The main chemical component is borosilicate glass, a hollow transparent sphere under an electron microscope. Hollow glass beads have low density, high strength, high-temperature resistance, acid and alkali resistance, low thermal conductivity, electrical insulation, and other characteristics. They have good fluidity and chemical stability and are multi-functional frontier new mat What is Hollow glass powder?Hyundai E&C said it had developed the world's first high-strength concrete with reduced viscosity by utilizing hollow glass powder. It is possible to significantly reduce the viscosity of concrete with only a small amount of hollow glass powder and secure workability easily because external temperatures do not affect it. The builder has verified the excellent performance of high-strength concrete with a compressive strength of up to 80MPa through field demonstration.

Hollow glass powder for use

Glass powder is an inorganic amorphous hard particle powder, usually used as a highly transparent and hard-filling material. In the production, the raw materials used are PbO, SiO2, TiO2, and other electronic-grade raw materials. These are mixed and then undergo solid phase reaction at high temperature to form glass homogeneous with disordered structure. The chemical properties are stable, and its acid resistance has far exceeded lead oxide's. However, in the expression of chemical composition,

More>>

Low expansion coefficient of super weather resistant powder material hollow glass powder

What is hollow glass powder?The hollow glass powder is a high-transparency powder that is resistant to scratching and easy to polish. Mainly used as a crystal primer for fine furniture and as a paint for decorating with a primer. Glass powder has exceptionally stable chemical properties and is resistant to alkalis and acids. It is a super weather-resistant powder decoration material with a low expansion coefficient: transparent surface, small particle size, good dispersion, high transparency, an

More>>

Inorganic amorphous hard particle powder Hollow glass powder

What is hollow glass powder?The hollow glass powder is an inorganic amorphous hard ultrafine particle powder with a white appearance. Raw materials such as high-temperature and high-purity silicon oxide and aluminum oxide are used in production. A transparent glass powder with a disordered structure is formed through ultra-clean production processes. The chemical properties are stable, and it is an ultra-weather resistant powder material with acid and alkali resistance, chemical inertia, and low

More>>

Process of hollow glass powder

The chemical composition of hollow glass brick is inorganic silicate minerals such as high-grade glass sand, soda ash, quartz powder, etc. The raw material is melted at high temperatures and processed through fine processing. It is non-toxic, harmless, pollution-free, odorless, and does not harm the human body. It is a truly green and environmentally friendly product. The production process of the fusion bonding method is as follows: raw material mixing → melting → cutting → pressing half blank

More>>

What is hollow glass powder

The hollow glass powder is a kind of inorganic square hard ultrafine particle powder produced by Youhe Chemical, with a white appearance. Raw materials such as high-temperature and high-purity silicon oxide and aluminum oxide are used in production. A transparent glass powder with a disordered structure is formed through ultra-clean production processes. The chemical properties are stable, and it is an ultra-weather resistant powder material with acid and alkali resistance, chemical inertia, and

More>>

Use and function of glass powder

The glass powder is a scratch-resistant, easy-to-polish, highly transparent powder mainly used as a crystal primer for high-end furniture and a dual-purpose paint for the bottom surface during decoration. The glass powder is suitable for PE fine primer, vinyl, acrylic, polyester, polyurethane, nitrocellulose, alkyl, etc. Using the top coat of furniture, paint has excellent transparency, thixotropy, hardness, and wear resistance. The recommended amount of addition is 3% to 7%, and the recommended

More>>

What is a hollow glass sphere?

What is a hollow glass sphere?Hollow Glass Microspheres (HGMS) is near perfect spherical bubbles made of thin-walled glass, approximately 50 microns, with a very low density between 0.1 and 0.4 g/cm3. The glass type is amorphous and can be of low or high purity.Hollow glass microspheres are specially processed glass microbeads whose main characteristic is a lower density and poorer thermal conductivity than glass microbeads. It is a micron-level new lightweight material developed in the 1950s an

More>>

Hollow glass powder is a lightweight and multifunctional material

Hollow glass powder is a micron-level hollow glass micro sphere with a smooth surface. The main chemical component is silicate glass.

More>>

Related news

Coco alkylbis(hydroxyethyl)methyl Ethoxylated Chlorides CAS 61791-10-4

It has dual nature as cationic and ionic. Has a good solubilization, can be compounded, reduces amount of solubilizer in formula and improves cloud point. About Coco alkylbis(hydroxyethyl)methyl Ethoxylated Chlorides CAS 61791-10-4: It is both cationic (cationic) and non-ionic (non-ionic), has a good solubilization, can be compounded, reduces solubilizer in the formulas, and improves cloud point. The product is also wettable and spreadable, and it can improve the degreasing, even at low leve

More>>

Additive-manufacturing-TA32-titanium-alloy-powder-research-and-development -results-excellent-mechanical-properties

Titanium alloys and superalloys have gradually proven to be the leading materials in the rapidly growing additive manufacturing industry.

More>>

Introduction of Calcium hexaboride

Calcium hexaboride (CaB6) is a divalent alkaline-earth cubic hexaboride characterized by low density (2.45 g/cm3 ), high melting point (2235°C), high hardness/Young’s modulus [27 GPa (Hv)/379 GPa], high electrical conductivity, as well as good chemical stability. In addition, it has several other unique properties, including low work function, stable specific resistance, low thermal expansion coefficient (within certain temperature ranges), high-temperature weak ferromagnetism, and high neutron

More>>

Quick Reviews


Sales Manager:

Amy
15+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory


Sales Manager:

Aimee
14+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory

Contact Us


E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

0086-0379-64280201 brad@ihpa.net skype whatsapp

Popular Topics:

Privacy Terms Advertise Contact