Trending

E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

Newsmis-asia

page2_What_Leading local media on chemical materials, nano-ma
  • Lithium battery anode materials are materials that can store and release lithium ions, and they are an important part of lithium batteries. MAX phase materials are novel layered carbon-nitride inorganic non-metallic materials with the electrical and thermal conductive qualities of metals Surfactants are a class of compounds that reduce the surface tension of a liquid. They can be adsorbed on gas-liquid or liquid-liquid interfaces, thus changing the properties of the interface and affecting its stability, wettability, viscosity, surface potential, etc. Polycarboxylate superplasticizer is used primarily in cement concrete to act as a dispersant. It is composed of polymers containing sulfonic acid group (-SO3H) and carboxyl groups (-COOH) or derivatives of them and features high efficacy, environmental protection, and security. Zircoa Zirconia Powder (Zirconium Oxide, ZrO2) is synthesized from zircon sand (ZrO2 •SiO2) using a solid-state reaction process. Nickel boride is an efficient catalyst and reducing agent. It is used as a heterogeneous hydrogenation catalyst. Zirconium diboride (ZrB2) is an ultra-high-temperature ceramic powder. With good high-temperature strength, it is used in the aerospace industry for hypersonic flight or rocket propulsion. Invar 36® is an iron-based alloy with 36 % nickel. Invar 36® also has excellent mechanical properties and a low tendency to fatigue in a cryogenic environment. Invar 36® is an iron-based alloy with 36 % nickel. A special feature of this material is its low coefficient of thermal expansion below its Curie temperature of 280°C. Tert dodecyl mercaptan (TDM) was first proposed as a mixed collector with NaOl for diaspore flotation. It is proved that the selective separation of diaspore and kaolinite can be effectively achieved using a mixed collector of NaOl and TDM (NaOl: TDM mole ratio = 8:2, dosage = 0.1 mM) at pH = 9. Compared with single collector NaOl or TDM, mixed collector NaOl/TDM has stronger hydrophobic association and surface activity. Mixed collector NaOl/TDM can co-adsorb on diaspore through physical adsorpt

Is potassium silicate safe

What is Potassium silicate?The USDA approves potassium silicate as a fertilizer for conventional agriculture. It is used on various crops, including rice, wheat, barley, sugar cane, melons, grapes and ornamentals. Potassium silicate is also used to manage certain fungal diseases on high-value crops. Silicon and potassium are found in nature, but the potassium silicate compound must be manufactured. This doesn't necessarily mean that potassium silicate is inorganic. The compound's function is to

More>>

What is Tantalum Carbide

Tantalum Carbide (TaC) is a hard, brittle refractory ceramic with good electrical conductivity. It is an additive in high-temperature ceramics and aerospace industries for aircraft and rockets. It is odorless and brown-gray. Tantalum carbide is widely used as a sintering additive in ultra-high temperature ceramics or as a ceramic reinforcement in high-entropy alloys due to its excellent physical properties in melting point, thermal conductivity, thermal shock resistance, and chemical stability.

More>>

What is Bi2S3

Bismuth(III) sulfide (Bi 2S 3) is a bismuth and sulfur chemical compound. It occurs in nature as the mineral bismuthinite. Bismuth sulfide belongs to group 15 post-transition metal tri chalcogenides. Two irreversible and exothermic transitions are observed at around 210 and 253°C in the DSC thermograms of bismuth sulfide powder. They correspond to the crystallization of Bi2S3, followed by the decomposition of bismuth- and sulfur-rich sulfides and the subsequent formation of Bi2S3. The endotherm

More>>

What is hafnium carbide

Hafnium carbide (HfC) belongs to so-called "hard metals." In the periodic table, these materials are carbides of transition metals of groups IV–VI. HfC is a promising candidate for extremely high-temperature applications owing to its high melting point (>3900 °C), high hardness and elastic modulus, and good resistance to chemical attack. Given these properties, HfC is an attractive material for applications in the fields such as nuclear rocket propulsion, nuclear reactors, the space aircraft ind

More>>

What temperature does hafnium carbide melt

What is hafnium carbide?Hafnium carbide (HfC) belongs to so-called "hard metals." In the periodic table, these materials are carbides of transition metals of groups IV–VI. HfC is a promising candidate for extremely high-temperature applications owing to its high melting point (>3900 °C), high hardness and elastic modulus, and good resistance to chemical attack. Given these properties, HfC is an attractive material for applications in the fields such as nuclear rocket propulsion, nuclear reactors

More>>

What is Zinc Nitride

Zinc Nitride (Zn3N2) Powder is a grey powder with a cubic crystal structure. It is soluble in hydrochloric acid and can decompose at 700℃. Zinc nitride is useful in optical and electronic devices. It is doped with Oxygen to prepare a potential nitride-based transparent conductor used in semiconductors. Zinc nitride can be obtained by thermally decomposing zinc amide (zinc diamine) in an anaerobic environment at temperatures over 200 °C. The by-product of the reaction is ammonia. Zinc nitrate is

More>>

The handling precautions for zinc nitrate

What is Zinc Nitride?Zinc Nitride (Zn3N2) Powder is a grey powder with a cubic crystal structure. It is soluble in hydrochloric acid and can decompose at 700℃. Zinc nitride is useful in optical and electronic devices. It is doped with Oxygen to prepare a potential nitride-based transparent conductor used in semiconductors. Zinc nitride can be obtained by thermally decomposing zinc amide (zinc diamine) in an anaerobic environment at temperatures over 200 °C. The by-product of the reaction is amm

More>>

What is the main source of germanium

Germanium is used in the manufacture of wide-angle camera lenses. The element gives special properties to the glass. Because germanium has traits similar to silicon and tin, the semiconductor industry uses germanium regularly. Ingestion of powder, fume from overheating may be irritating Ingestion: considered low toxicity. Skin Contact: Possible low-level local irritation -wash skin with soap and water. Eye Contact: Local irritation -flush eyes thoroughly with water for several minutes. Germanium

More>>

What everyday items is germanium found in

Germanium can break down your kidney tissue, causing kidney damage. In some cases, germanium can even cause chronic kidney failure and death. Due to these risks, most doctors recommend avoiding supplements that contain it. It is employed in equipment for detecting and measuring such radiation, such as windows and lenses. It has a low energy bandgap and a higher junction leakage current. Germanium will probably be used as a thin layer on an insulating substrate to overcome these disadvantages. Al

More>>

What are the handling precautions for zinc nitrate

What is Zinc Nitride?Zinc Nitride (Zn3N2) Powder is a grey powder with a cubic crystal structure. It is soluble in hydrochloric acid and can decompose at 700℃. Zinc nitride is useful in optical and electronic devices. It is doped with Oxygen to prepare a potential nitride-based transparent conductor used in semiconductors. Zinc nitride can be obtained by thermally decomposing zinc amide (zinc diamine) in an anaerobic environment at temperatures over 200 °C. The by-product of the reaction is amm

More>>

What is AlMgB14 ceramics were reported as high-hardness materials over a decade agomagnesium boride

AlMgB14 ceramics were reported as high-hardness materials over a decade ago. While different synthesis routes for processing AlMgB14 ceramics were reported in the past, the synthesis routes are still not optimized and present a significant challenge to the manufacturers. This work explored six different synthesis routes for the synthesis of AlMgB14 powder. The synthesized compositions were characterized by XRD, where weight fractions of each phase were calculated by Rietveld refinement. Hardness

More>>

What is Nickel Copper

Nickel-Copper (Ni-Cu) alloys exhibit simultaneously high strength and toughness, excellent corrosion resistance, and may show good wear resistance. The Ni-Cu system forms the basis for the Monel alloy family. Monel was discovered by Robert Crooks Stanley who was employed by the International Nickel Company (INCO) in 1901. The new alloy was named in honour of the company president, Ambrose Monell. Ni and Cu exhibit very similar atomic characteristics. They both have face centred cubic (fcc) cryst

More>>

Related news

Titanium powder and its application

Titanium: Overview Ti is the chemical element that contains titanium. It has the symbol Ti as well as an atomic number 22. It has an atomic mass of 47.867. This is measured in Daltons. It is a shiny transition metal, with silver colors, high strength and low corrosion resistance in aqua regia or chlorine. To create strong and lightweight alloys of titanium, you can combine it with other elements like iron, aluminum and vanadium. Titanium, titanium and titanium alloy Powder Titanium pow

More>>

Volumetric Feeder for Fumed Silica

Fumed silica is also known as pyrogenic silica because it is produced in flame pyrolysis of silicon tetrachloride or from quartz sand vaporized in a 3000 °C electric arc. Fumed Silica consists of microscopic droplets of amorphous silica fused into branched, chainlike, three-dimensional secondary particles, agglomerating into tertiary particles. The resulting powder has an extremely low bulk density of 2.5-11.8 lbs/ft3 (40–190 kg/m3), a primary particle size of 5–50 nm (smaller than the average p

More>>

What products have zinc sulfide

Zinc Sulfide is a white pigment used in paints, coatings, paper, plastics and rubber applications. Specifically, Zinc Sulfide is used for abrasion-sensitive coating systems, polyester automotive compounds, and UV curing paints for fast and complete hardening of thick paint films. Zinc supplements often promote skin health and treat common skin conditions like acne ( 15 ). A type of zinc called zinc sulfate has been proven especially useful for decreasing symptoms of mild to moderate acne ( 16 ).

More>>

Quick Reviews


Sales Manager:

Amy
15+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory


Sales Manager:

Aimee
14+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory

Contact Us


E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

0086-0379-64280201 brad@ihpa.net skype whatsapp

Popular Topics:

Privacy Terms Advertise Contact