Trending

E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

Newsmis-asia

page2_ant_Leading local media on chemical materials, nano-ma
  • Surfactants are a class of compounds that reduce the surface tension of a liquid. They can be adsorbed on gas-liquid or liquid-liquid interfaces, thus changing the properties of the interface and affecting its stability, wettability, viscosity, surface potential, etc. The most important applications of ZrB2 are in the high-temperature fields where it is used as a refractory material; hence, the effect of alumina on the oxidation rate of ZrB2 ceramic should be essentially investigated Invar 36® is an iron-based alloy with 36 % nickel. A special feature of this material is its low coefficient of thermal expansion below its Curie temperature of 280°C. The high-temperature oxidation of tantalum carbide (TaC) powder was investigated to determine the application of refractory materials for space crafts. TaC powder with an average particle size of about 10 Jim was used in this experiment. The samples were oxidized in air at 573 to 1273K for 5 min to 25 h. The weight changes were measured to estimate the oxidation properties. Exposed for short oxidation times of 5 min, started at 873K, and weight changes increased with increasing oxidation tempera Tantalum Carbide (TaC) is a hard, brittle refractory ceramic with good electrical conductivity. It is an additive in high-temperature ceramics and aerospace industries for aircraft and rockets. It is odorless and brown-gray. Tantalum carbide is widely used as a sintering additive in ultra-high temperature ceramics or as a ceramic reinforcement in high-entropy alloys due to its excellent physical properties in melting point, thermal conductivity, thermal shock resistance, and chemical stability. What is Tantalum Carbide?Tantalum Carbide (TaC) is a hard, brittle refractory ceramic with good electrical conductivity. It is an additive in high-temperature ceramics and aerospace industries for aircraft and rockets. It is odorless and brown-gray. Tantalum carbide is widely used as a sintering additive in ultra-high temperature ceramics or as a ceramic reinforcement in high-entropy alloys due to its excellent physical properties in melting point, thermal conductivity, thermal shock resistance, The size of the aluminum powder significantly affected the detonation performance of explosives. Small-sized aluminum powder is more likely to react with explosive detonation products with an advanced reaction time, large reaction volume, and fast energy release, which enhances the work capacity of explosives. Especially the addition of nano-sized aluminum powder can effectively improve the work capacity of explosives. Leonid Kaled et al. studied Alex nano-aluminum particles and their applicatio What is aluminum powder?As nano-aluminum powder (NAP) can improve the detonation performance of aluminum-containing explosives, more and more explosives with NAP as the metal ingredient have been studied. It is believed that the added nano-sized aluminum powder can significantly enhance the mechanical sensitivity of explosives. However, the mechanism for the enhancement has not been clarified. To illuminate the effects of NAP on the mechanical sensitivity of explosives, two RDX-based aluminum-co What is Titanium dioxide?Titanium dioxide is a powder and used as a white pigment in various products, such as sunscreens, paints, and plastics. Titanium dioxide may can boost and brighten white opacity as how well it scatters light. In food and drugs, which additive is known as E171 and helps define colors clearly (cracking and breakdown of materials). You can discover titanium dioxide in food products like candy, baking and cake decorations, and white sauces. It is often used to give a natural What is Titanium dioxide?Titanium dioxide (TiO2) is a fine white powder or dust that occurs naturally. It was first intentionally produced for use as a white pigment in 1923. It is naturally opaque and bright, which makes it useful for use in paper, ceramics, rubber, textiles, paints, inks, and cosmetics. Titanium dioxide is also a UV filter and an effective active ingredient in sunscreens. Exposure can irritate the eyes, nose, and throat since it has been shown to cause lung cancer in animals.

What are the advantages of Ti6Al4V

The advantages of Ti6Al4v alloy are high strength, low density, and the advantage of it being non-toxic, and the human body does not reject it. Because of these properties, Ti6Al4v is distinguished by its unique properties. However, the as-SLMed Ti-6Al-4V alloy parts typically exhibit low flexibility because of the formation of acicular and brittle α′ martensites. It is essential to use post-heat treatment to change their microstructures to achieve superior mechanical properties. Ti 3 AI 2.5 is

More>>

How is Ti6Al4V manufactured

What is Ti6Al4V?Product Description. Ti-6Al-4V is a titanium alloy with high specific strength and excellent corrosion resistance. It is one of the most commonly used titanium alloys. High tensile strength and lightweight/low density: The military, aviation, and aerospace industries have long benefited from these properties of Ti-6Al-4V. It is used in the structural components of aircraft, hydraulic systems, engine components, helicopter rotor blades, rockets, and spacecraft. Commonly referred t

More>>

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Antimony sulfide can be used to make matches, fireworks and colored glass. It is used in rubber manufacturing as a military and vulcanizing agent.Particle size : 100mesh Purity: 99.99% Antimony Sulfide Sb2S3: Sulfide can be bismuth or a powder. Template oxidation outside. It also dissolves in a nonvolatile hydroxide and hydrochloric acids, releases hydrogen sulfide but is insoluble in water. Pure triforium is a powdery yellow substance that does not form a shape. It is insoluble with water,

More>>

High purity Amorphous Boron Market

What is Amorphous Boron?Boron, with an atomic number 5 and denoted by the symbol B, is a metalloid element that is hard and highly heat-resistant. Boron has two allotropes in the form of amorphous and crystalline. High-purity Amorphous Boron powder is a brown-colored powder that is highly reactive compared to its crystalline counterparts. Boron, with an atomic number 5 and denoted by the symbol B, is a metalloid element that is hard and highly resistant to heat. Boron has two allotropes in the f

More>>

How are diamond Nanothreads made?

What is Diamond Nanoparticles?Diamond nanoparticles, or nanodiamonds (NDs), are single-crystal diamonds with carbon as the essential component with high physical and chemical properties. These are nanoscopic versions of sp3 carbon, while other carbon nanotubes and fullerenes are of sp2 configuration. Nanodiamonds containing nitrogen-vacancy defects have been used as an ultrasensitive label for vitro diagnostics, using a microwave field to modulate emission intensity. The structure of nanodiamond

More>>

Fe3O4 has found interesting and important applications in different science

As a ferromagnetic powder and conductive material, Fe3O4 has found interesting and important applications in different science, technology, and industry sectors. Fe3O4 magnetic powder has a very common application as black pigment. The time-dependent magnetism property of Fe3O4 is an advantage for applications at different temperatures for particular purposes. The unique electronic structure of Fe3O4 originates from the combination of ferric and ferrous ions, making it a superconductor while bei

More>>

Octanol polyoxyethylene ether5

Octanol polyoxyethylene is a type of non-ionic detergent, soluble with water. Octanol Polyoxyethylene Ether: Octanol polyoxyethylene is a type of non-ionic detergent, soluble in aqueous solutions without gel phase. It is a global trusted brand Octanol polyoxyethylene ether . Send an inquiry for the latest. Prices of Octanol polyoxyethylene ether. Octanol Polyoxyethylene Ether is available for purchase. Bulk discounts are available. Product Performance of Octanol: Octanol

More>>

Dispersant MF Naphthalenesulfonic Acid CAS 9084-06-4

Easily soluble, without permeability, in water with any hardness. It is resistant to acids, alkalis, hard water, and inorganic sulfates. Dispersion >=90% Dispersant Naphthalenesulfonic Acid (MF Naphthalenesulfonic Acid): Dispersant Naphthalenesulfonic Acid MF has rich and fine foam with low degreasing powers, low irritation of skin and hair as well as good biodegradability. It is a global trusted brand Dispersant MF Naphthalenesulfonic Acid . Send an inquiry for the latest. Prices of

More>>

High Purity Tantalum Boride TaB2 Powder CAS 12007-35-1, 99%

Tantalum Diboride (also known as Tantalum Boride) is a powder with a chemical formula TaB2. Tantalum Diboride is insoluble in acids. Purity>99%Particle Size: 325 Mesh Tantalum Boride Powder tantalum diboride or tantalum boride is gray powder. The Tantalum diboride has a pH of and is insoluble in nitric, hydrofluoric or acidic solutions. Slightly soluble with hot hydrofluoric or sulfuric acid. Solvent in sodium carbonate and molten alkali. Crystal and TaB2 films have a Vickers Hardness around

More>>

How Much Do You Know About Wear-resistant Alumina Ceramic Linings? |

What is Wear resistant alumina ceramic lining (Alumina Ceramic Lining)?The wear-resistant alumina lining is made from a corundum special ceramic, which is formed using Al2O3 (as the main raw material) and a rare metallic oxide as a solvent. This ceramic was then calcined in high temperatures of 1700°C.There are many different types of alumina tiles that can be used as wear-resistant ceramic linings. These include alumina sheets, high aluminum linings (also known as wear-resistant ceramics), alum

More>>

Molybdenum disulfide-The king of solid lubricants |

Molybdenum ore is composed primarily of molybdenum diulfide. The solid powder is lead gray or black. It is odorless, has a slippery texture and a slight slickness. It has a metallic luster and is similar to graphite.Molybdenum diulfide is used as a solid lubricant in the automotive and aerospace industries (fixers, components), industrial machinery (general oil), composites industry(parts preparation), metallurgy industrial (powder-lubrication), among others. It is used in lubricants as an addit

More>>

LPCVD Silicon Nitride Coated Wafer Uses and Advantages

LPCVD is a process in which thin films of semiconductor material are deposited on both sides of the wafer. The resultant layers have an excellent conformal coating, high breakdown voltage, and dielectric isolation. These films are used for many applications, including semiconductors, biomedical devices, and solar cells. There are many advantages to using LPCVD films, and we'll discuss some of them in this article. PCVD silicon nitride is a thin film of silicon dioxide deposited in silicon nitrid

More>>

Related news

Foam stabilizer for Foam Concrete

Foam stabilizer, also known as concrete foam stabilizer, is the most important foam stabilizing component in the foam agent. Among the various factors that stabilize the foam, the foam stabilizer is the first influencing factor. It is usually added t

More>>

Yttrium nitride is a dark gray powder

Yttrium nitride is a dark gray powder, which is a kind of rare earth nitride. It has a very high melting point and keeps stable under high temperatures. So yttrium nitride can apply to refractory materials like titanium nitride and zirconium nitride. Yttrium nitride, Y5N14, was synthesized by a direct reaction between yttrium and nitrogen at ∼50 GPa and ∼2000 K in a laser-heated diamond anvil cell. High-pressure single-crystal X-ray diffraction revealed that the crystal structure of Y5N14 (space

More>>

Several types of WSBC bearings

The bearing i s a component that fixes and reduces the friction coefficient of the load during the mechanical transmission process. It can also be said that when other mechanical parts move relative to each other on the shaft, they are used

More>>

Quick Reviews


Sales Manager:

Amy
15+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory


Sales Manager:

Aimee
14+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory

Contact Us


E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

0086-0379-64280201 brad@ihpa.net skype whatsapp

Popular Topics:

Privacy Terms Advertise Contact