Trending

E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

Newsmis-asia

page2_bismuth telluride_Leading local media on chemical materials, nano-ma
  • This article gives you a detailed understanding of the difference between P-type bismuth telluride and N-type bismuth telluride The Ti-doped Bi 2 Te 3 with concentrations 1, 3, and 5 in % Ti were synthesized using a simple powder metallurgy method. It is revealed that the optimum Ti addition in parent material changes the conduction type from undoped n-type into p-type with 1 % Ti concentration. However, the Ti addition above 1 % decreases the absolute Seebeck coefficient—furthermore, the conduction type returns to w-type at 5 % Ti addition. A 70 % and 74 % reduction in the absolute Seebeck coefficient and the electrical In 1821, T.J. Seebeck discovered the Seebeck effect when he noticed that a compass needle was deflected when a metal was heated with a heat gradient. He called the effect thermomagnetism. Oersted later redefined it when he observed that an electric current could produce a magnetic field and gave it the correct name of thermoelectricity. Thermoelectric devices can convert electrical energy into a temperature gradient. The application of this cooling or heating effect remained minimal until the de Eighteen years before anyone understood what an electron was or that they existed, back when the current was thought to be an incompressible fluid, Edwin Hall, while working on his dissertation, discovered that when applying a current along a thin gold leaf attached to a glass slide, there was no voltage read perpendicular to the current. Still, when the gold leaf slide was placed between the poles of a magnet, a transverse voltage appeared. He believed this phenomenon to be a new electromotive An experimental investigation of the electronic transport properties of bismuth telluride nanocomposite materials is presented. The primary transport measurements are electrical conductivity, the Seebeck coefficient, and the Hall effect. An experimental apparatus for measuring the Hall effect and electrical conductivity was designed, constructed, and tested. Seebeck coefficient measurements were performed on a commercial instrument. The Hall effect and Seebeck coefficient measurements are two of Bismuth telluride (Bi2Te3) is a gray or black hexagonal platelet with a metallic luster or gray powder. It is an alloy of two metallic elements (Bismuth and tellurium), also known as Bismuth (III) telluride. When alloyed with antimony or selenium, it is a semiconductor that is an efficient thermoelectric material for refrigeration or portable power generation. Topologically protected surface states have been observed in Bismuth telluride. Bismuth telluride and its alloys are unique materials. Th What is Bismuth telluride?Bismuth telluride (Bi2Te3) is a gray or black hexagonal platelet with a metallic luster or gray powder. It is an alloy of two metallic elements (bismuth and tellurium), also known as bismuth(III) telluride. When alloyed with antimony or selenium, it is a semiconductor that is an efficient thermoelectric material for refrigeration or portable power generation. Topologically protected surface states have been observed in Bismuth telluride. Typical Applications of Bismuth The electronic transport properties vary significantly with alloy composition. Pisarenko plot fits of Seebeck versus Hall carrier concentration using a single valley effective mass model assuming potential deformation scattering find that the Seebeck effective mass, m∗S, decreases from 1.06 me for Bi2Te3 to 0.25 me for Bi2Se3. Similarly, the weighted mobility, μw, which sets the maximum achievable power factor, decreases monotonically from 590 to 170 cm2V-1 s-1 going from Bi2Te3 to Bi2Se3. This Bismuth telluride, bismuth selenide, and all intermediate alloys Bi2Te3−xSex have the tetradymite crystal structure in the symmetry group R3¯m. The material is comprised of repeating quintuple layers of X(1)–Bi–X(2)–Bi–X(1), where the number in parentheses designates two inequivalent chalcogens (X) sites. Chalcogen atoms octahedrally coordinate bismuth atoms, and Bi octahedrally coordinates the X(2) site atoms. The X(1) site atoms are covalently bonded with three Bi atoms and by weaker van der W The n-type Bi2Te3-Bi2Se3 alloy is less straightforward. Mass contrast alloy scattering modeling does not match thermal conductivity values reported in the literature, and there is wide variability in qualitative trends reported. The electronic band structure of Bi2Te3 comprises conduction and valence band extrema with high valley degeneracy. In contrast, the structure of Bi2Se3 is far simpler, with a direct gap between singly degenerate extrema at the Γ point. This dramatic difference in Fermi s

Electronic Structure of Bismuth Telluride

What is Bismuth Telluride?Bismuth Telluride is a narrow gap-layered semiconductor with high thermal conductivity. Recent research has confirmed that bismuth telluride may significantly increase the speed of microchips and be the basis for the emerging next-generation technology known as "Spintronics." American Elements Bismuth Telluride products are generally available in most volumes and can be purchased in bulk. American Elements can produce most materials in high purity and ultra-high purity

More>>

Bismuth Telluride – Properties and Applications |

What property does Bismuth Telluride have? Bismuth-telluride, a powdery gray substance with the formula Bi2Te3, is a material that contains a high concentration of bismuth. Bismuth telluride, a semiconductor, has a good electrical conductivity but mediocre thermal conductivity. It is not fatal to consume large quantities of bismuth, but it can cause serious harm if ingested. The material is able to allow electrons on its surface to move at room temperatures without using energy, which can l

More>>

Bismuth Telluride – Property and Application |

What property does Bismuth Telluride have? Bismuth telluride The molecular formula of the powder is Bi2Te3. Bismuth telluride, an indirect band-gap semiconductor, has a band gap of 0.145eV at room temperature, electron mobility of 0.135m2/s (V*s) and hole mobility of 4.x10-2m2/s (V*s), and a coefficient of thermoelectric quality of 1.6x10-3/K. Bismuth Telluride is a dense material with a density 7.8587g/cm3 at a melting temperature of 585degC. It is bound with covalent and ionic bonds. Bi

More>>

Is bismuth toxic to inhale

Acute and Chronic Effects: Prolonged inhalation of bismuth dust may cause mental changes, nervousness, blood changes, lym- phagocytosis and bone marrow depression. Ingestion of bismuth compounds may cause nausea, vomiting, diarrhoea, and skin and mucous membranes pigmentation. Taking an overdose of this medicine may cause unconsciousness or death. Signs of overdose include convulsions (seizures), hearing loss, confusion, ringing or buzzing in the ears, severe drowsiness or tiredness, severe exci

More>>

What country discovered bismuth

The largest deposits of Bismuth are found in Bolivia, although Bismuth is usually obtained as a by-product of mining and refining lead, copper, tin, silver and gold. Thermoelectric cooling is entirely dependent on the ambient temperature for its ability to cool. Unlike a compressor system, which can maintain sub-freezing temperatures in certain applications, a thermoelectric device can only bring down the temperature to a certain point below room temperature. Bismuth is one of the weirdest-looki

More>>

Why bismuth Cannot conduct electricity

Bismuth is a metal having five electrons in its outermost shell and high resistance to electric current. So, it is a poor conductor of electricity. Also, Bismuth is seldom mined independently because it is not profitable enough. Usually, it is extracted with tungsten or lead. So the resulting bismuth mining for use as a lead replacement caused massive amounts of lead mining in China. The unintended consequence was more lead mining! You should not use bismuth subsalicylate if you have bleeding pr

More>>

What is the future use of bismuth

Bismuth is showing promise in many developing applications in the superconductor, energy conservation, synthetic fuels and nanoparticles sectors. Bismuth finds its main uses in pharmaceuticals, atomic fire alarms and sprinkler systems, solders and other alloys and pigments for cosmetics, glass and ceramics. It is also used as a catalyst in rubber production. Citations. ... However, the thermoelectric materials currently used in commercial devices usually contain rare and toxic elements, such as

More>>

What are the best metals for thermoelectric generator

Three materials are commonly used for thermoelectric generators. These materials are bismuth (Bi2Te3) telluride, lead telluride (PbTe) and Silicon germanium (SiGe). Properly utilizing TEG can become a potentially sustainable and renewable energy resource (Elsheikh et al., 2014). Depending on the administration time of Bismuth in the clinic, its toxicity can be roughly divided into acute and chronic exposures. Both exposure doses can cause neurotoxicity, gastrointestinal toxicity, nephrotoxicity,

More>>

What are the side effects of bismuth crystal

What is Bismuth telluride?Bismuth telluride (Bi 2Te 3) is a gray powder that is a compound of bismuth and tellurium also known as bismuth(III) telluride. It is a semiconductor, which, when alloyed with antimony or selenium, is an efficient thermoelectric material for refrigeration or portable power generation.. They are also the best materials for use in thermoelectric generators when the temperature of the heat source is moderate. Bismuth telluride is the dominant thermoelectric material for ap

More>>

Collaborative regulation of acoustic transport properties of bismuth-based telluride nanostructured materials

Bi2te3-based alloy hexagonal nanosheets were synthesized by gas induced reduction (GIR) method with independent innovation. It was found that the growth of Bi2Te3-based alloy hexagonal nanosheets was based on a selective adsorption mechanism. It was found for the first time that Cu could effectively prevent the oxidation of Bi2Te3. The theoretical calculation shows that the reason is that Cu doping can improve the stability of the system, and Cu is a substitute for doping rather than intercalati

More>>

Collaborative regulation of electrical transport properties of bismuth-based telluride nanostructured materials

Bismuth telluride hex hexagonal nanosheets were synthesized by gas induced reduction method. The growth process of the spell hexagonal nanosheets was studied by adjusting the synthesis parameters, and the growth mechanism was revealed. The effect of sulfur doping on the band structure and the density of the electronic states of bismuth telluride is elucidated by theoretical calculation. Combining homogenizing glue and gas-induced reduction technology, prepared bismuth telluride nanostructured th

More>>

Preparation and thermoelectric properties of bismuth telluride intercalated superlattice materials

Flexible thermoelectric devices have the advantages of strong bending resistance and durability and can be used in wearable devices with broad application prospects. Bismuth telluride is a thermoelectric material with the best performance at room temperature, but its flexibility is poor, and its application in thin film devices is limited. Organic intercalation of layered thermoelectric materials is a means to improve flexibility and optimize thermoelectric properties. Based on this, this projec

More>>

Related news

The Bayer Process-The Main Production Method of Alumina

Alumina Bauxite is a stable aluminium oxide that is used in ceramics, material science and mining. The rapid development of our country’s electrolytic aluminium, ceramics industries, medicine, electronics and machinery will increase the demand for alumina. There are many ways to extract alumina from ores, such as using the Bayer method or combining Bayer and sintering. The Bayer Process was the primary method for producing aluminum, with its output accounting for approximately 95% of total wor

More>>

High Purity BAM Aluminum Magnesium Boride AlMgB14 Powder

OPEC+ is likely to stick to its plan for a small increase in oil BAM powder will continue to be influenced by the oil supply shortage. About AlMgB14 alloy powder:Aluminum boride or Al3Mg3B56, commonly known as BAM, is a compound of alumin

More>>

SLES Sodium Lauryl Ether Sulphate CAS 68585-34-2, 68%-72%

Sodium Lauryl Ether Sulphate exhibits excellent decontamination properties, emulsification and foaming abilities, as well as resistance to hardwater.Solid Content: 68%-72% SLES, Sodium Lauryl Sulfate The sodium lauryl ether sulphate is readily soluble in water. It has excellent decontamination properties, emulsification and foaming abilities, and it can be used with hard water. It is a global trusted brand SLES is Sodium Lauryl Sulfate . Send an inquiry for the latest. Prices of SLE

More>>

Quick Reviews


Sales Manager:

Amy
15+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory


Sales Manager:

Aimee
14+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory

Contact Us


E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

0086-0379-64280201 brad@ihpa.net skype whatsapp

Popular Topics:

Privacy Terms Advertise Contact