Trending

E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

Newsmis-asia

hollow glass powder_Leading local media on chemical materials, nano-ma
  • The energy consumption required to manufacture HOLLOW GLASS MICROSPHERES POWDERs, as described in Examples 1-4 of U.S. Patent No. 4,391,646 (Howell), can range from about 8 to about 50 kW-h per kg of product made. While commercial processes operating at a larger scale are more efficient, they still tend to use more than 5 kW- h per kg of product. Provided here are improved energy-efficient processes for producing HOLLOW GLASS MICROSPHERES POWDERs having high strength-to-density ratios compared w Attempts to form monocellular HOLLOW GLASS MICROSPHERES POWDERs from a feed comprising a blowing agent using electrical furnaces were not successful because the short residence times used in a flame-forming process could not be attained. That lack of control on the time scale means that forming conditions can only be optimal for a part of the particle size distribution, so HOLLOW GLASS MICROSPHERES POWDER yields tend to be low. To overcome the delicate balance between glass melt viscosity and pr Hollow glass microspheres ("HOLLOW GLASS MICROSPHERES POWDERs"), also referred to as "glass bubbles," are balloon-like glass structures having a median diameter of fewer than 500 micrometers. HOLLOW GLASS MICROSPHERES POWDERs are currently made using a process where a milled glass powder (or "glass frit") that contains a suitable blowing agent is flame-heated to temperatures at which the glass begins to soften. At these temperatures, the blowing agent either becomes or produces a gas, causing th The evolution of the tensile strength, the tensile modulus, and the elongation at the break of the three samples. Firstly, it is necessary to say that the results of the tensile test following those reported by other authors for the neat PA2200 [16,18]. Secondly, the tensile modulus of PH-1 and PH-2 is much higher than that of neat PA2200. As Fig. 3 shows, the neat PA2200 has the highest tensile strength and the best ductility, which are 47.63MPa and 17.56%, respectively. Overall, although the t Regarding the thermal information obtained from DSC analysis, Table 3 shows a single melting peak, Tm, around 185℃ belonging to the three materials' γ-crystal phase of polyamide. Similarly, the crystallization peak, Tc, coincided at ∼140℃for all materials. The sintering window, defined as the difference between endothermic and exothermic peak temperatures, ranged around 40℃ for the two composites, asseverating the suitability of PH1 and PH-2 for the SLS process. Tm and Tc values are increased wh The matrix material PA2200, with an average particle size of 60μm and a white appearance, was obtained from EOS GmbH in Germany. Moreover, the mixing ratio of new and old powder is 1:1. Filler additives, Hollow glass powder was surface treated with silane coupling agent supplied by The Minnesota Mining and Manufacturing(3M) Company in the USA. As an inorganic material, Hollow glass powders have no polarity and poor compatibility with PA2200. Thus, the mechanical properties of sintered parts of P Hollow glass powder (HGM), mainly composed of borosilicate glass, is an important inorganic filler with low density, high-temperature resistance, good fluidity, heat insulation, and good thermal stability. Through surface modification, HGB is applied to produce the composites, consequently improving properties. The improvements are in physical properties, such as tensile strength, elasticity modulus, dimensional stability, heat distortion temperature, and low density. More previous studies on th Selective laser sintering (SLS) to prepare composites by adding filler into the polymer effectively saves costs and reinforces the sintered parts. This article investigated the fabrication of PA2200 composites filled with different volume fractions of Hollow glass powder (HGM) by SLS. HGM was prepared by silane coupling agent surface treatment. The particle size distribution, microstructure, and thermal and mechanical properties of PA2200/HGM composites were studied by scanning electron microsco What is Hollow glass powder?The hollow glass powder is a micron-sized hollow glass microsphere with a smooth surface. The main chemical component is borosilicate glass, a hollow transparent sphere under an electron microscope. Hollow glass beads have low density, high strength, high-temperature resistance, acid and alkali resistance, low thermal conductivity, electrical insulation, and other characteristics. They have good fluidity and chemical stability and are multi-functional frontier new mat What is Hollow glass powder?Hyundai E&C said it had developed the world's first high-strength concrete with reduced viscosity by utilizing hollow glass powder. It is possible to significantly reduce the viscosity of concrete with only a small amount of hollow glass powder and secure workability easily because external temperatures do not affect it. The builder has verified the excellent performance of high-strength concrete with a compressive strength of up to 80MPa through field demonstration.

The energy consumption required to manufacture HOLLOW GLASS MICROSPHERES POWDERs

The energy consumption required to manufacture HOLLOW GLASS MICROSPHERES POWDERs, as described in Examples 1-4 of U.S. Patent No. 4,391,646 (Howell), can range from about 8 to about 50 kW-h per kg of product made. While commercial processes operating at a larger scale are more efficient, they still tend to use more than 5 kW- h per kg of product. Provided here are improved energy-efficient processes for producing HOLLOW GLASS MICROSPHERES POWDERs having high strength-to-density ratios compared w

More>>

HOLLOW GLASS MICROSPHERES POWDER will solidify before it can burst

Attempts to form monocellular HOLLOW GLASS MICROSPHERES POWDERs from a feed comprising a blowing agent using electrical furnaces were not successful because the short residence times used in a flame-forming process could not be attained. That lack of control on the time scale means that forming conditions can only be optimal for a part of the particle size distribution, so HOLLOW GLASS MICROSPHERES POWDER yields tend to be low. To overcome the delicate balance between glass melt viscosity and pr

More>>

HOLLOW GLASS MICROSPHERES POWDERs

Hollow glass microspheres ("HOLLOW GLASS MICROSPHERES POWDERs"), also referred to as "glass bubbles," are balloon-like glass structures having a median diameter of fewer than 500 micrometers. HOLLOW GLASS MICROSPHERES POWDERs are currently made using a process where a milled glass powder (or "glass frit") that contains a suitable blowing agent is flame-heated to temperatures at which the glass begins to soften. At these temperatures, the blowing agent either becomes or produces a gas, causing th

More>>

Tensile results of Hollow glass powder

The evolution of the tensile strength, the tensile modulus, and the elongation at the break of the three samples. Firstly, it is necessary to say that the results of the tensile test following those reported by other authors for the neat PA2200 [16,18]. Secondly, the tensile modulus of PH-1 and PH-2 is much higher than that of neat PA2200. As Fig. 3 shows, the neat PA2200 has the highest tensile strength and the best ductility, which are 47.63MPa and 17.56%, respectively. Overall, although the t

More>>

Thermal characterization of Hollow glass powder

Regarding the thermal information obtained from DSC analysis, Table 3 shows a single melting peak, Tm, around 185℃ belonging to the three materials' γ-crystal phase of polyamide. Similarly, the crystallization peak, Tc, coincided at ∼140℃for all materials. The sintering window, defined as the difference between endothermic and exothermic peak temperatures, ranged around 40℃ for the two composites, asseverating the suitability of PH1 and PH-2 for the SLS process. Tm and Tc values are increased wh

More>>

Materials and Processing of Hollow glass powder

The matrix material PA2200, with an average particle size of 60μm and a white appearance, was obtained from EOS GmbH in Germany. Moreover, the mixing ratio of new and old powder is 1:1. Filler additives, Hollow glass powder was surface treated with silane coupling agent supplied by The Minnesota Mining and Manufacturing(3M) Company in the USA. As an inorganic material, Hollow glass powders have no polarity and poor compatibility with PA2200. Thus, the mechanical properties of sintered parts of P

More>>

Hollow glass powder (HGM) mainly composed of borosilicate glass

Hollow glass powder (HGM), mainly composed of borosilicate glass, is an important inorganic filler with low density, high-temperature resistance, good fluidity, heat insulation, and good thermal stability. Through surface modification, HGB is applied to produce the composites, consequently improving properties. The improvements are in physical properties, such as tensile strength, elasticity modulus, dimensional stability, heat distortion temperature, and low density. More previous studies on th

More>>

Processing and properties of Hollow glass powder particulate

Selective laser sintering (SLS) to prepare composites by adding filler into the polymer effectively saves costs and reinforces the sintered parts. This article investigated the fabrication of PA2200 composites filled with different volume fractions of Hollow glass powder (HGM) by SLS. HGM was prepared by silane coupling agent surface treatment. The particle size distribution, microstructure, and thermal and mechanical properties of PA2200/HGM composites were studied by scanning electron microsco

More>>

The Effect of Hollow glass powder

What is Hollow glass powder?The hollow glass powder is a micron-sized hollow glass microsphere with a smooth surface. The main chemical component is borosilicate glass, a hollow transparent sphere under an electron microscope. Hollow glass beads have low density, high strength, high-temperature resistance, acid and alkali resistance, low thermal conductivity, electrical insulation, and other characteristics. They have good fluidity and chemical stability and are multi-functional frontier new mat

More>>

Hollow glass powder to Develop high strength concrete

What is Hollow glass powder?Hyundai E&C said it had developed the world's first high-strength concrete with reduced viscosity by utilizing hollow glass powder. It is possible to significantly reduce the viscosity of concrete with only a small amount of hollow glass powder and secure workability easily because external temperatures do not affect it. The builder has verified the excellent performance of high-strength concrete with a compressive strength of up to 80MPa through field demonstration.

More>>

Kinds of hollow glass powder

Some depression glass is uranium glass. Although of marginal quality, Depression glass has been highly collectible since the 1960s. Due to its popularity as a collectible, it is becoming more scarce on the open market. Rare pieces may sell for several hundred dollars. These imported Rondels are created by shaping Glass with a footing tool. They are solid in color and are often a shade darker than their sheet glass counterpart. Formed with a thick edge, they can be easily led or copper-foiled. Ro

More>>

Where is hollow glass or glass microsphere used

What is Hollow glass powder?Hollow Glass Microspheres (HGMS) are near-perfect engineered spherical bubbles of thin-walled Glass, approximately 50 microns in size, with a low density of between 0.1-0.4 g/cc. The glass type is amorphous and can come with low-purity or high-purity grades. Hollow glass microspheres achieve high Total Solar Reflectance (TSR) levels in coatings. 3M White Hollow Glass Microspheres K-15, Size: 10-50 Micron at Rs 1201/kg in Mumbai. In contrast, hollow glass microspheres

More>>

Related news

What are the properties of foam concrete

What is foam concrete?Foam concrete is classified as a highly air-entrained sand cement, or cement-only slurry with greater than 20% air by volume. "a cementitious material that consists of minimum 20 percent foam". The mixes that Propump provides range from 20% – 85% by foam volume. Most of the material provided by Propump has at least 50% foam by volume entrained. Air is mechanically entrained using a pre-formed foam mixed with the cementitious base material to produce a lighter-density mixed

More>>

What is the hardness of titanium diboride Vickers

What is titanium diboride? Titanium diboride (TiB2) is well-known as a ceramic material with relatively high strength and durability, characterized by its melting point, hardness, strength-to-density ratio, and wear resistance. Current use of TiB2 appears to be limited to specialized applications in impact-resistant armour, cutting tools, crucibles, neutron absorbers and wear-resistant coatings. TiB2 is extensively used for evaporation boats for the vapour coating of aluminium. The effect of TiB

More>>

The synthesized β Fe2O3

Before its pressure treatment, the purity and structural features of the synthesized β-Fe2O3 sample were checked using conventional X-ray powder diffraction (XRD) and 57Fe Mössbauer spectroscopy. The room-temperature 57Fe Mössbauer spectrum of the β-Fe2O3 sample is well deconvoluted into three spectral components – two dominant doublets whose isomer shift and quadrupole splitting values are characteristic of the b-sites and d-sites in the β-Fe2O3 crystal lattice (with an ideal spectral ratio of

More>>

Quick Reviews


Sales Manager:

Amy
15+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory


Sales Manager:

Aimee
14+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory

Contact Us


E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

0086-0379-64280201 brad@ihpa.net skype whatsapp

Popular Topics:

Privacy Terms Advertise Contact