Trending

E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

Newsmis-asia

lightweight concrete_Leading local media on chemical materials, nano-ma
  • Lightweight foamed concrete is usually prepared by introducing foaming agents such as hydrogen peroxide and plant surfactants into cement paste to form high pores and voids in the matrix. A foaming agent is a material that facilitates foam formation, such as a Surfactant or a blowing agent. Foaming agents are used extensively in air mist drilling to produce high, stable foams under various conditions. It reduces surface tension and is effective in fresh water and salt water. In this study, it wa What is foaming agent?The foaming agent is an indispensable component in the preparation of foam concrete by using prefabricated foams. This study used four types of foaming agents to prepare foam concrete. Effect of the foaming agent on the properties of fresh and hardened foam concrete, the interaction between the foaming agent and cement, and the gas–liquid interface in foam concrete were studied. It is observed that the interaction between foaming agents and cement played a more significant This study aims to investigate the ultra-lightweight foam concrete of rarely studied density ranges (200–500 kg/m3), looking for the most favorable configuration of properties of such feasible insulating material: compressive strength and thermal conductivity. The conducted tests examined the influence of the density, synthetic, and protein foaming agents and binder type on the properties mentioned above. The wide range of the tested densities below 500 kg/m3 allowed for identifying properties a Preformed foam from the synthetic foaming agent was added into the geopolymer paste in various ratios of geopolymer paste to the foaming agent volume of 1:0.50, 1:0.67, 1:0.75, 1:1.00, 1:1.33, 1:1.50, and 1:2.00. Formerly, the foaming agent was performed by mixing the synthetic foam and water by using foam generators. The foam was then added and mixed for 5 minutes. Subsequently, the mixing rotation speed was lowered to avoid the formation of defects. The lightweight foaming geopolymer was poure The mass of building construction depends on the types of materials used. The current application of Ordinary Portland Cement (OPC) for construction has a clear advantage in terms of strength but would result in a high-weight structure. Should any disaster cause a building to collapse, heavier construction materials would significantly slow down the required rescue actions. Therefore, the development of lightweight concrete has become one of the concerns today to produce a lighter, safer structu There is an experimental study of monolithic foam concrete "SOVBI" samples with a density of 205 kg /m3 (grade D200) for combustibility. The evaluation criteria are the following values of combustion characteristics: temperature increment in the furnace, duration of the stable flame burning, and sample mass loss. The experimental results show the following values for foam concrete: temperature increment in the furnace of 2 °C, duration of the stable flame burning of 0 s, and sample mass of 24.4% The cement foaming agent (also known as foaming concrete agent) is an admixture which can lower the surface tension of liquid to produce large amounts of uniform, stable foam that can be used in the manufacture of concrete. Definition of concrete foaming agents: Cement Foaming Agent also known as light concrete foaming agent or concrete foaming agency. This admixture can decrease the surface tension and create a stable and uniform foam to produce foamed concrete. The foaming agent can Concrete Foaming Agent Lightweight Concrete Solutions,Concrete Admixtures,, Concrete foaming agents are substances which increase concrete's density. These agents improve the flow of the concrete mixture and fill in any voids. These compounds can be used to reduce the cement needed for concrete. They do however lower the con Large-scale foam concrete backfilling projects such as highway roads and bridges, backfills of bridge abutments, replacement and heightening above tunnels, large-scale coal mine filling, and road widening soft foundation backfilling.

Why is Lightweight foamed concrete

Lightweight foamed concrete is usually prepared by introducing foaming agents such as hydrogen peroxide and plant surfactants into cement paste to form high pores and voids in the matrix. A foaming agent is a material that facilitates foam formation, such as a Surfactant or a blowing agent. Foaming agents are used extensively in air mist drilling to produce high, stable foams under various conditions. It reduces surface tension and is effective in fresh water and salt water. In this study, it wa

More>>

MANUFACTURING PROCESS OF FOAM CONCRETE

What is foaming agent?The foaming agent is an indispensable component in the preparation of foam concrete by using prefabricated foams. This study used four types of foaming agents to prepare foam concrete. Effect of the foaming agent on the properties of fresh and hardened foam concrete, the interaction between the foaming agent and cement, and the gas–liquid interface in foam concrete were studied. It is observed that the interaction between foaming agents and cement played a more significant

More>>

The ultra lightweight foam concrete of rarely studied density ranges

This study aims to investigate the ultra-lightweight foam concrete of rarely studied density ranges (200–500 kg/m3), looking for the most favorable configuration of properties of such feasible insulating material: compressive strength and thermal conductivity. The conducted tests examined the influence of the density, synthetic, and protein foaming agents and binder type on the properties mentioned above. The wide range of the tested densities below 500 kg/m3 allowed for identifying properties a

More>>

Foaming agent Cellular Lightweight Concrete

Preformed foam from the synthetic foaming agent was added into the geopolymer paste in various ratios of geopolymer paste to the foaming agent volume of 1:0.50, 1:0.67, 1:0.75, 1:1.00, 1:1.33, 1:1.50, and 1:2.00. Formerly, the foaming agent was performed by mixing the synthetic foam and water by using foam generators. The foam was then added and mixed for 5 minutes. Subsequently, the mixing rotation speed was lowered to avoid the formation of defects. The lightweight foaming geopolymer was poure

More>>

Lightweight concrete was classified as one of materials possessing a typical density ranging

The mass of building construction depends on the types of materials used. The current application of Ordinary Portland Cement (OPC) for construction has a clear advantage in terms of strength but would result in a high-weight structure. Should any disaster cause a building to collapse, heavier construction materials would significantly slow down the required rescue actions. Therefore, the development of lightweight concrete has become one of the concerns today to produce a lighter, safer structu

More>>

Combustibility of lightweight foam concrete based on natural protein foaming agent

There is an experimental study of monolithic foam concrete "SOVBI" samples with a density of 205 kg /m3 (grade D200) for combustibility. The evaluation criteria are the following values of combustion characteristics: temperature increment in the furnace, duration of the stable flame burning, and sample mass loss. The experimental results show the following values for foam concrete: temperature increment in the furnace of 2 °C, duration of the stable flame burning of 0 s, and sample mass of 24.4%

More>>

Foaming Agent for Lightweight Concrete

The cement foaming agent (also known as foaming concrete agent) is an admixture which can lower the surface tension of liquid to produce large amounts of uniform, stable foam that can be used in the manufacture of concrete. Definition of concrete foaming agents: Cement Foaming Agent also known as light concrete foaming agent or concrete foaming agency. This admixture can decrease the surface tension and create a stable and uniform foam to produce foamed concrete. The foaming agent can

More>>

Concrete Foaming Agent Lightweight Concrete Solutions

Concrete Foaming Agent Lightweight Concrete Solutions,Concrete Admixtures,,

More>>

Concrete Foaming Agents afford more on Lightweight concrete

Concrete foaming agents are substances which increase concrete's density. These agents improve the flow of the concrete mixture and fill in any voids. These compounds can be used to reduce the cement needed for concrete. They do however lower the con

More>>

TR-40 Foam Concrete Blocks Making Machine

Large-scale foam concrete backfilling projects such as highway roads and bridges, backfills of bridge abutments, replacement and heightening above tunnels, large-scale coal mine filling, and road widening soft foundation backfilling.

More>>

The difference between foam concrete and lightweight aggregate

Foamed concrete is to fully foam the foaming agent diluent by mechanical means through the foaming system of the special equipment for foamed concrete, and evenly mix the foam with the cement slurry, and then conduct in-situ construction through the

More>>

Testing methods for lightweight concrete

Lightweight concrete, also known as foamed concrete, is to fully foam the foaming agent mechanically through the foaming system of the foaming machine, and evenly mix the foam with the cement slurry, and then go through the pumping system of the foam

More>>

Related news

What are the benefits of silicon dioxide in humans

Silicon dioxide, or silica, is considered a trace mineral and is hypothesized to enable mineralization for bones, teeth, and collagen. Silicon dioxide has not been widely studied, so a daily required intake level is not established. Silicon dioxide may support the formation of collagen fibers, which means it may help at the most basic level of your bone health. According to one study, silica stimulates collagen synthesis (which gives structure to connective tissue), and the growth of bone cells

More>>

Lithium Nitride Powder – Property and Application |

Lithium-nitride This is a compound of metal and nitrogen with the molecular formula Li3N. It's a purple or red-colored crystalline solid that has a light green color when reflected and a ruby colour in transmitted sunlight. Property of Lithium Nitride Metallic lithium at room temperature can partly produce lithium nitride if it's exposed to air. In a nitrogen stream that is 15-20 times more efficient than the air, lithium can produce lithium nitride. This is when all of the lithium beco

More>>

Semiconductors of SiO2

Silicon dioxide is used in semiconductor technology for primary passivation (directly on the semiconductor surface) as an original gate dielectric in MOS technology. Today when scaling (dimension of the gate length of the MOS transistor) has progressed below 10 nm, silicon dioxide has been replaced by other dielectric materials like hafnium oxide or similar with higher dielectric constant compared to silicon dioxide, as a dielectric layer between metal (wiring) layers (sometimes up to 8-10) con

More>>

Quick Reviews


Sales Manager:

Amy
15+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory


Sales Manager:

Aimee
14+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory

Contact Us


E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

0086-0379-64280201 brad@ihpa.net skype whatsapp

Popular Topics:

Privacy Terms Advertise Contact