Molybdenum Disulfide Coating Properties

What is Molybdenum disulfide?Molybdenum disulfide is used as a dry lubricant in, e.g., greases, dispersions, friction materials, and bonded coatings. Molybdenum-sulfur complexes may be used in suspension but are more commonly dissolved in lubricating...…

More>>

ATO cathodes from Li-O2 cells in different states

The total amount of LiOH is quantified by titration with an aqueous solution of HCl using methyl red as an indicator while purging the titrant solution with argon to avoid the dissolution of atmospheric CO2. It has to be noted that dissolved CO2 from...…

More>>

Assigned to the (002) plane of graphite

The strong and sharp X-ray diffraction (XRD) peak at 26.36° can be assigned to the (002) plane of Graphite. The lattice spacing of d (002) is calculated to be 3.38 Å by bulk Graphite, suggesting a high degree of graphitization of Graphite. This concl...…

More>>

Fracture Toughness of TiB2

A clearer indication of the role of grain size in the optimization of the mechanical properties of TiB2 is provided by the fracture toughness as measured by the mode I critical stress intensity factor KIc. For fully dense specimens at room temperatur...…

More>>

This approach is applied here to the properties of TiB2

The bane of all ceramic materials is that a particular measured property value for a particular specimen may depend on a particular feature of the particular microstructure of that particular specimen. In the absence of tightly controlled processing ...…

More>>

Worldwide demand for graphite steadily increased throughout 2012 and into 2013

Worldwide demand for graphite steadily increased throughout 2012 and into 2013. This increase resulted from the improvement of global economic conditions and its impact on industries that use graphite. Principal import sources of natural graphite wer...…

More>>

The phototransistors utilizing hybrid MoS2

The phototransistors utilizing hybrid MoS2/PbS QDs were fabricated by Pak et al.. The PbS QDs were surface modified with n-type tetrabutylammonium iodide (TBAI) and p-type 1,2-ethanedithiol (EDT) ligands to develop p–n junctions. The MoS2/PbS-TBAI/Pb...…

More>>

The AgNCs decorated MoS2 film shows 19-fold increment in photocurrent compared with pristine MoS2 film.

The photoresponsivity of MoS2 with AgNCs-based flexible photodetector increased 38 times to 7940 A W−1 at 3 V under 2.2 pW incident power compared with pristine MoS2 film with decreasing incident power intensity due to the reduced scattering and reco...…

More>>

Eurol Molybdenum Disulphide MoS2 Grease

What is Molybdenum disulfide?Molybdenum disulfides are categorized among the newly emerging and promising two-dimensional materials as nanosheets and nanoparticles because of their specifically different biological, physical, chemical, electrical, an...…

More>>

Introduction to Hafnium Silicide HfSi2

Hafnium disilicide or hafnium silicide with the molecular formula HfSi2 has the molecular weight of 234.66. It is gray powder.…

More>>

High Purity Antimony Tin Oxide ATO Powder CAS 128221-48-7, 99.9%

is a reliable supplier for high purity Antimony Tin Oxide ATO Powder CAS 128221-48-7,99.9%.…

More>>

What should be paid attention to when using concrete admixtures(2)?

In the process of concrete mixing, the mixing method of admixture has a great influence on the effect of admixture.…

More>>

Related news

CMEE Coconut Methyl Ester Ethoxylates CAS 65218-33-7

CMEE Coconut Methyl Ester Ethoxylates are low foaming, easy to wash, dissolve quickly in coldwater, have no gel phase and good compatibility.Active matter content (%): 95 The following is a list of the most recent articles about CMEE Coconut Met...…

More>>

CuO crystal has monoclinic structure

CuO crystal has a monoclinic structure and belongs to symmetry. Cupric oxide has four formula units per unit cell. The coordination number of copper atoms is 4, linked to four oxygen neighbor atoms in an approximately square planar configuration in t...…

More>>

B6O and B4C have the same space group and similar lattice parameters

Among these superhard materials, B6O and B4C have the same space group and similar lattice parameters; therefore, we speculated that a solid–solution interlayer between B6O and B4C crystals could be formed during the sintering reaction that might inc...…

More>>
0086-0379-64280201 brad@ihpa.net skype whatsapp