Role of Alloying Elements of copper alloys

What is Nickel-Copper?Nickel-Copper (Ni-Cu) alloys exhibit simultaneously high strength and toughness, excellent corrosion resistance, and may show good wear resistance. The Ni-Cu system forms the basis for the Monel alloy family. Monel was discovered by Robert Crooks Stanley who was employed by the International Nickel Company (INCO) in 1901. The new alloy was named in honour of the company president, Ambrose Monell. Ni and Cu exhibit very similar atomic characteristics. They both have face cen

More>>

Silicon nitride is then usually formed through a reaction

The basis of silicon nitride ceramics is silicon extracted from pure quartz sand (SiO2). Silicon nitride is then usually formed through a reaction of pure silicon with nitrogen at around 1,200 °C / 2,192 °F. Ceramic components made of silicon nitride are then produced using liquid-phase sintering from fine Silicon nitride powder, which is mixed with other sintering additives to enable complete compaction. The compaction and needle-shaped recrystallization of the silicon nitride particles is caus

More>>

What is molybdenum Disilicide used for

What is Molybdenum disilicide?Molybdenum disilicide (MoSi2, or molybdenum silicide), an intermetallic compound, a silicide of molybdenum, is a refractory ceramic with primary use in heating elements. It has moderate density, a melting point of 2030 °C, and is electrically conductive. The thermal stability of MoSi2, alongside its high emissivity, makes this material, WSi2, attractive for applications as a high emissivity coating in heat shields for atmospheric entry. MoSi2 is a gray metallic-loo

More>>

Nano Al Powder Usually Requires Surface Coating

Al Powder is a powder with small particles, high specific surface area, and high energy. It's widely used for the manufacture of thermite as well propellant and pyrotechnics. The development of nanotechnology has made nano-aluminum powder a hotspot for research. This powder is better than the traditional aluminum powder. Why are Nano Al Powder surfaces coated? Nano Al Powder's activity is expected to be low and less affected by environmental conditions (temperature and humidity) during the st

More>>

What is silica aerogel powder?

Aerogels usually refer to the light nano solid materials with nanoporous network structure formed by the aggregation of ultrafine particles of nanometer scale, and the pores of the network are filled with gaseous disperse medium. Aerogel is

More>>

Related news

Method detects defects in 2-D materials for future electronics, sensors

A laser beam (yellow) reflects off a 2D material (orange) highlighting a grain boundary defect in the atomic lattice. To further shrink electronic devices and to lower energy consumption, the semiconductor industry is interested in using 2-

More>>

This approach is applied here to the properties of TiB2

The bane of all ceramic materials is that a particular measured property value for a particular specimen may depend on a particular feature of the particular microstructure of that particular specimen. In the absence of tightly controlled processing procedures, the best that one can do as a means of generically characterizing such a material is to establish trends of values that correlate with changes in the microstructure and composition. Given such trends, it should then be possible to interpo

More>>

Sec-Octyl alcohol ethoxylates;2-Octanol ethoxylates

Aqueous solution 1% is a milky, white liquid. No gel phase occurs during dissolution. About Sec-Octyl alcohol ethoxylates;2-Octanol ethoxylates: Good dispersion, 1% solution in water is a white milky liquid. No gel phase occurs during dissolution. Global Trust is a trusted brand Sec-Octyl alcohol ethoxylates;2-Octanol ethoxylates . Send an inquiry for the latest. Prices of Sec-Octyl alcohol ethoxylates;2-Octanol ethoxylates. If you would like to buy Sec-Octyl alcohol ethoxylates;2-O

More>>
0086-0379-64280201 brad@ihpa.net skype whatsapp