High Purity Antimony Telluride Powder Sb2Te3 Cas 1327-50-0, 99.99%

Antimony telluride has the chemical formula Sb2Te3. It is a topological insulater. Particle Size: -80mesh and -100mesh
Purity: 99.99%

Antimony Telluride sb2Te3 powder
Chemical formula of antimony telluride: Sb2TE3.Molecular mass 626.30.Gray hard.Melting temperature 639.Relative density 6.5018. In nitric acids, dissolve. Antimony Telluride is a covalent (ionic) bond that has a particular van der Waals structure, triangular cell system and the original cell of rhombus Hexahedron.
Telluride, which is similar to other alveolar-sulfide layered antimony materials, is a grayish crystalline solid that has a multilayered structure. Two atomic antimony, three atomic protein sheets form the layer. The weak van der Waals force holds it together. The topological insulator is also used. It has thickness-dependent physical property.
A rhomboid crystal structure is found in Sb2Te3. The crystal material is composed of five covalently bound atoms. These sheets form five atom thick (in order: Te–Sb–Te–Te), which hold the plates together by Van der Waals attraction. Because of its lamellar shape and weak interlamellar force, bulk telluride is easily mechanically separated to remove the monolayers. Sb2Te's semiconductor properties include the ability to separate monolayers from antimony and bismuth. You can convert it to N-type, and even P-type semiconductors if you use the right dopants. Send an inquiry for the most current price to purchase bulk Antimony Telluride Sb2Te3 dust.

Antimony Telluride sb2Te3 powder features:

Antimony Telluride is an inorganic chemical compound. The chemical formula for the antimony telluride (Sb2Te3) is The chemical formula is Sb2Te3.

Antimony Telluride sb2Te3 powder specification:

Product
Purity
APS
The color of the sky
Form

energy gap

Melting Point
Electric resistivity

Department of thermoelectric quality

Tr-Sb2Te3
99.99%-99.9999%
100mesh
Gray crystal
powder,granule,block
0.23eV
620
3x10-6O*
0.9x10-3/K

You can order different products depending on your requirements.

Technical Parameters of Antimony Telluride SB2Te3 powder:

Certificate of Antimony Telluride
Purity Cu Ag Mg Ni Bi Fe Cd
99.99 =5ppm =2 ppm =5ppm =5ppm =5ppm =5ppm =5ppm Minimum 10ppm


How does Antimony Telluride SB2Te3 () powder be made?
Telluride antimony preparation is as follows: using SbCl3 and K2TeO3 as starting materials, according to the stoichiometric ratio of n (SbCl3): n (K2TeO3) = 2:3 said take 0.002 mol SbCl3 and 0.003 mol K2TeO3, 250 ml and join the two round bottom flask, and then add in the 0.5 g polyvinylpyrrolidone, 80 ml 0.5 gNaOH and a reduction of diethylene glycol (take) by the measuring cylinder, put two round bottom flask temperature control heating jacket, set the temperature of 240 deg C, insulation 4 h, adjusting the rotational speed of 500 r/min.After the temperature of the reactants dropped to room temperature, the centrifuge was centrifuged 3 times with isopropyl alcohol and acetone, respectively. At 4000r/min the speed of the centrifuge was adjusted to 4 min. After centrifugation was completed, the liquid in the top became clear. At room temperature the temperature of reactant is decreased to 100 ml per centrifuge tube. After centrifugation, the centrifugal with isopropanol is centrifuged. The black precipitate was dried in the oven for six hours. Finally, the powder became blackened Sb2Te3.

Antimony Telluride sb2Te3 powder
Sb2Te3 has been examined in the same way as other binary chalcogenides of bismuth or antimony. By adding the right dopants, it can be made into N-type and P type semiconductors.
Comparable to the single frequency detection of pure Sb2Te3, iron doped Sb2Te3 creates many Fermi pockets which results in lower carrier density.
The pseudo-binary intermetallic germanium and antimony telluride system is made up of Sb2Te3 as well as germanium telluride, (GeTE).
Antimony telluride can be used in solid-state fridges, just like Bi2Te3 and bismuth telluride. This is because it has strong thermoelectric properties.

Antimony Telluride sb2Te3 powder storage condition:

You should keep the reservoir closed and store it in a dry, cool place.

Shipping Antimony Telluride Sb2Te3 Powder:
We offer many packing options that are dependent on the amount of Antimony Telluride, Sb2Te3 Powder.
Antimony Telluride, Sb2Te3 Powder Packaging: Vacuum Packing, 100g, 500g, 1kg/bag or 25kg/barrel. Or as requested.
Antimony Telluride Sb2Te3 powder shipping: Shipments could be made by express, air, or sea once payment has been received.


Antimony Telluride Powder Properties

Other Titles Antimony(III) Diantimony tritelluride, Antimony(3+) telluride, Antimony
sesquitelluride
1327-50-0
Compound Formula Sb2Te3
Molecular Weight 626.32
Appearance Grey Solid
Melting Point 580 degC (1076 degF)
Solubility In Water N/A
Density 6.5 g/cm3
Purity 99.99%
Particle Size -80mesh, -100mesh
Boling Point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact Mass 250.810043
Monoisotopic N/A

Antimony Telluride Powder Health & Safety Information

Safety Notice Alert
Hazard Statements H302-H332-H411
Flashing Point N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information N/A
WGK Germany 3

Inquiry us

NEXT Telluride Powder

Our Latest Products

High Purity Antimony Telluride Powder Sb2Te3 Cas 1327-50-0, 99.99%

is a reliable supplier for high purity Antimony Telluride Powder Sb2Te3 Cas 1327-50-0, 99.99%.…

High Purity Tin Telluride SnTe Powder Cas 12040-02-7,99.99%

is a reliable supplier for high purity Tin Telluride SnTe Powder Cas 12040-02-7,99.99%.…

High Purity Telluride Copper CuTe Powder Cas 12019-23-7, 99.9%

is a reliable supplier for high purity Telluride Copper CuTe Powder Cas 12019-23-7, 99.9%.…

0086-0379-64280201 brad@ihpa.net skype whatsapp