Basic information of tantalum carbide

Tantalum carbide is a light brown metallic cubic crystalline powder, belonging to the sodium chloride type cubic crystal system. At present, tantalum carbide is also used as a cemented carbide sintered crystal grain growth inhibitor, which has a significant effect on inhibiting crystal grain growth.

 
Properties of tantalum carbide
The density is 14.3g/cm3. It is insoluble in water, hardly soluble in inorganic acid, soluble in mixed acid of hydrofluoric acid and nitric acid, and can be decomposed. Strong oxidation resistance, easily melted and decomposed by potassium pyrosulfate. High conductivity, resistance at room temperature is 30Ω, showing superconducting properties.
 
Uses of tantalum carbide
Used in powder metallurgy, cutting tools, fine ceramics, chemical vapor deposition, hard wear-resistant alloy tools, tools, molds, and wear-resistant and corrosion-resistant structural components additives to improve the toughness of the alloy. The sintered body of tantalum carbide is golden yellow and can be used as a watch decoration. Tantalum carbide is also used as a cemented carbide sintered crystal grain growth inhibitor, which has a significant effect on inhibiting crystal grain growth, with a density of 14.3g/cm3.
 
Introduction of Tantalum Carbide Material
Tantalum carbide (TaC) ceramic particles have the advantages of high melting point (3880℃), high hardness (2100HV0.05), good chemical stability, and strong electrical and thermal conductivity. However, due to their cost and other issues, the current reports are limited to nickel-based, Aluminum-based, and other substrates. Chao et al. used laser cladding technology to prepare a nickel-based reinforced tantalum carbide surface composite material. The results show that compared with pure nickel, the hardness of this material is significantly increased, and the wear rate is significantly lower than that of hardened steel; Yu et al. The relationship between the in-situ reaction and directional solidification of tantalum carbide and its microstructure with chromium-based, chromium-based and aluminum-based reinforcement. The results show that as the solidification rate increases, the solid phase structure changes, and the volume fraction of tantalum carbide also changes with the solidification rate. Change; Wang Wenli and others used laser cladding technology to prepare in-situ TaC particle-reinforced nickel-based composite coatings on the surface of A3 steel. The results show that under appropriate process conditions, it produces TaC particle-reinforced nickel-based composite coatings. Good, smooth surface, good metallurgical bonding between the coating and the substrate. However, there are few reports on the in-situ formation of TaC on the steel base.
 
Ozbo.com (aka. Tanki New Materials Co.Ltd.) is a trusted global chemical material supplier & manufacturer with over 12 years of experience in providing super high-quality chemicals and Nanomaterials. As a leading nanotechnology development and product name manufacturer, Tanki New Materials Co.Ltd dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for tantalum carbide,please feel free to contact us.
 

Inquiry us

Our Latest Products

Factory 3-5nm Nanodiamond Powder CAS 7782-40-3

Brief Introduction of Nanodiamond PowderProduct name: Nanodiamond PowderFormular: C Product NameNanodiamond PowderPurity 99%Particle Size3-5nmAnalysis ResultChemical CompositionAnalysis (%)Al0.0046%Co0.007%Si0.079%Na0.002%K0.00015%Ca0.003%Mg0.00058%...…

CAS No. 557-05-1 40% Water-based Zinc Stearate Zinc Stearate Emulsion

Product DescriptionProduct Description Description of zinc stearate emulsionZinc stearate emulsion is easy to disperse in water, has ultra-fineness, good dispersion compatibility. Zinc stearate emulsion has the characteristics of lubricating and deli...…

China factory cheapest price lightweight concrete wall panel making machine large hydraulic cement foaming machine equipment

Product performance of TR-40 Cement Foaming Machine1. The shell is made of high-strength precision thickened steel plate, painted twice, which is durable.2. The slurry output is uniform and stable, the density of the foam concrete finished product i...…

0086-0379-64280201 brad@ihpa.net skype whatsapp