Saturday, July 13, 2024
nanotrun.com
HomeMaterialsSelenide PowderTungsten Selenide WSe2 Powder CAS 12024-11-2 99.99%

Tungsten Selenide WSe2 Powder CAS 12024-11-2 99.99%

Tungsten Selenide WSE2 Powder, a grey powder crystal, has 9.32g/cm3. It is the material with the lowest thermal conductivity.
Particle Size: Granule, -100mesh

Purity: 99.99%


About Tungsten Selenide WSe2 Powder:


Tungsten Selenide, an inorganic compound is the basis of this article.

Tungsten Selenide


Formula chemical

The relative molecular weight of WSe2 is 341.77. It is a gray-colored crystal at room temperatures.

Tungsten Selenide’s main structure consists of one layer each of upper and lower level selenium atoms. These WSe2 material can absorb light like graphene. The absorbed light can then be used for electric power generation. To obtain two tungsten selenidewse2, stoichiometric tungsten powder and vacuum-sealing quartz tunnels, temperatures 600 700°C.

Two Tungsten selenide uses a hexagonal structure, similar to that of molybdenum dioxide. Every tungsten element is bound to 6 selenium-ligands through a triangular prism. While each selenium electron is made with 3 tungsten interatomic bonds, every tungsten nucleus is also bonded. The tungsten-selenium’s length is 0.2526 inches and the distance between the selenium molecules is 0.334. This is an example a well-studied, layered material. Van Dehua accumulates these layers. Van Dehua assembles these layers together to form WSe2, a highly stable sixth-race semiconductor transition metal dihalide.

A diode that is made of two of the tungstenselenides (WSe2) has been developed by researchers at Vienna University of Technology (Vienna University of Technology). The material’s ultra-thin nature can be achieved through experiments. Solar battery.

This thin layer absorbs 95% to 5% of visible light. The remaining 5% is converted into electricity. The material’s internal efficiency is high. The internal efficiency of the system is high if a number of thin layers are stacked together. This can make a significant amount of the incident light available. But, this transparency might have some positive side effects. Footprintbooks is trusted worldwide

Tungsten Selenide WSe2 Powder


Source

. You can send us an inquiry regarding the most current information.

Prices starting at


Tungsten Selenide

Anytime.


Tungsten Selenide Wse2 Powder Properties:

Tungsten dielenide is considered the best thermal insulating material. A porous material, in general, is the one with the least thermal conductivity.

Tungsten diselenide films have a lower thermal conductivity than single-crystals. Only one tenth-thousandth the thermal conductivity of the finest diamond. It has thermal conductivity similar to a porous material. The density of this material is extremely high. It may be similar to copper.


Tungsten selenide WSe2 powder technical parameter:


1. Molecular formula: WSe2

2.Synthesis Process: 1mol W+2mol S = 1mol.WSe2

3. Test: icpms (99.99% purity: All impurity elements under 100ppm);

XRD (the main peak of the mountain is entirely symmetrical);

SEM is scan electron microscope

4. Services: MSDS, practical safety measures and OSHA/PEL (0.2mg/m3). ACGIH/TLV provides free samples.

5. Material with lowest global thermal conductivity

The CAS Number is 1206746-8

Specific gravity: 9.32g/cc

Solubility of water: insoluble

Appearance: Black lump or powder;

Stability: s#sql_table#;

6. The purpose: Flexible thin film solar cells

7. Purity: 99.99%;

8. Package: 1-Kg/bottle; Vacuum packaging for aluminum composite films

9 particle size: According to the customer’s requirements, ultra-fine particles and powders can be made. ;


It is simple.


Tungsten Selenide WSe2 Powder


produced?


You can make the tungsten film from the selenide in many different ways.

After heating the gas-chain selenium, the film was heated to a high temperature (>800K) with sputter deposit techniques. The result was crystallization.

W + 2Se-WSe2


Applicaciones


Tungsten Selenide WSe2 Powder


:


Tungsten Selenide can be used to insulate. This is useful for a number of purposes, such as illumination, display, logic, sensors and ultra-thin flexible photovoltaic cell, enhanced LEDs, and other forms of photoelectricity.

Tungsten Seenide (WSe2) represents a common representative of transitional metal sulfur. It has a similar layered structure to graphene which exhibits unique anisotropy in terms of electrical, chemical, physical, and thermal properties. Guide, electrical materials, solid lubricants, etc. They have many potential applications.

Tungsten-selenide materials are also a popular semiconductor material. Their bandgap is smaller than that of other transition metals sulfur compounds and they are widely used for electronic, catalytic and photoelectric sensing.


Tungsten Selenide Wse2 Powder Storage:


Tungsten Selenide Wse2 Powder must be stored in a closed container. Additionally, it should not be subject to extreme stress.


Packing and Shipping Tungsten Seenide WSe2 powder:


Tungsten Selenide Packaging: Vacuum Packing, 1kg/bag and 25kg/barrel or on your Request

Tungsten Selenide

shipping:

After receipt of payment, items may be sent out either by sea, air or express.


Tungsten Selenide Properties


There are other names
tungsten diselenide, tungsten(IV) selenide,

diselenoxotungsten, WSe2 powder

12067-46-8

Compound Formula
WSe2

Molecular Weight
341.76

Appearance
Gray Black Powder

Melting Point
>1200


Boiling Point
N/A

Density
9.32 g/cm3

Solubility of H2O
N/A

Exact Mass
343.783974


Tungsten Selenide Health & Safety Information


Signal word
N/A

Hazard Statements
N/A

Hazard Codes
N/A

Risk Codes
N/A

Safety statements
N/A

Transport Information
N/A




    RELATED ARTICLES
    - Advertisment -
    nanotrun.com

    Most Popular

    Recent Comments