1. Цахиурын карбидын болор бүтэц ба политипизм
1.1 Куб ба зургаан өнцөгт политипүүд: 3C-аас 6H болон өнгөрсөн цаг хүртэл
(Цахиурын карбидын керамик)
Цахиурын карбид (SiC) is a covalently adhered ceramic composed of silicon and carbon atoms set up in a tetrahedral sychronisation, creating one of the most complex systems of polytypism in materials science.
Unlike a lot of ceramics with a solitary steady crystal framework, SiC exists in over 250 well-known polytypes– distinct piling sequences of close-packed Si-C bilayers along the c-axis– varying from cubic 3C-SiC (additionally referred to as β-SiC) to hexagonal 6H-SiC and rhombohedral 15R-SiC.
One of the most usual polytypes used in design applications are 3C (cubic), 4Х, and 6H (both hexagonal), each showing a little various electronic band structures and thermal conductivities.
3C-SiC, with its zinc blende framework, has the narrowest bandgap (~ 2.3 eV) and is usually expanded on silicon substrates for semiconductor tools, while 4H-SiC provides remarkable electron flexibility and is favored for high-power electronic devices.
The solid covalent bonding and directional nature of the Si– C bond confer exceptional solidity, дулааны хамгаалалт, and resistance to slip and chemical assault, making SiC ideal for extreme environment applications.
1.2 Issues, Doping, and Digital Residence
Regardless of its structural intricacy, SiC can be doped to attain both n-type and p-type conductivity, allowing its use in semiconductor devices.
Nitrogen and phosphorus serve as contributor pollutants, introducing electrons right into the transmission band, while light weight aluminum and boron work as acceptors, producing holes in the valence band.
Гэсэн хэдий ч, p-type doping efficiency is restricted by high activation powers, especially in 4H-SiC, which poses obstacles for bipolar tool layout.
Native defects such as screw misplacements, micropipes, and piling mistakes can weaken tool performance by acting as recombination facilities or leak courses, demanding top notch single-crystal development for electronic applications.
The vast bandgap (2.3– 3.3 eV depending on polytype), high failure electric area (~ 3 MV/cm), and excellent thermal conductivity (~ 3– 4 W/m · K for 4H-SiC) make SiC much superior to silicon in high-temperature, high-voltage, and high-frequency power electronics.
2. Handling and Microstructural Design
( Цахиурын карбидын керамик)
2.1 Sintering and Densification Techniques
Silicon carbide is naturally difficult to densify due to its strong covalent bonding and reduced self-diffusion coefficients, needing innovative processing techniques to attain full density without additives or with very little sintering help.
Pressureless sintering of submicron SiC powders is feasible with the enhancement of boron and carbon, which promote densification by eliminating oxide layers and enhancing solid-state diffusion.
Warm pushing applies uniaxial pressure during home heating, allowing full densification at reduced temperature levels (~ 1800– 2000 ° C )and generating fine-grained, high-strength components ideal for reducing devices and put on parts.
For big or complicated shapes, response bonding is used, where porous carbon preforms are penetrated with molten silicon at ~ 1600 ° C, creating β-SiC in situ with marginal shrinkage.
Гэсэн хэдий ч, residual cost-free silicon (~ 5– 10%) remains in the microstructure, limiting high-temperature efficiency and oxidation resistance above 1300 ° C.
2.2 Additive Production and Near-Net-Shape Manufacture
Current breakthroughs in additive manufacturing (AM), specifically binder jetting and stereolithography using SiC powders or preceramic polymers, allow the fabrication of intricate geometries formerly unattainable with conventional approaches.
In polymer-derived ceramic (PDC) routes, fluid SiC forerunners are formed through 3D printing and then pyrolyzed at heats to produce amorphous or nanocrystalline SiC, commonly needing more densification.
These techniques lower machining prices and product waste, making SiC much more available for aerospace, nuclear, and warm exchanger applications where complex layouts enhance efficiency.
Post-processing actions such as chemical vapor infiltration (CVI) or fluid silicon seepage (LSI) are sometimes utilized to improve density and mechanical stability.
3. Mechanical, Thermal, and Environmental Efficiency
3.1 Хүч чадал, Hardness, and Use Resistance
Silicon carbide ranks among the hardest recognized products, with a Mohs solidity of ~ 9.5 and Vickers firmness surpassing 25 Дундаж оноо, making it highly immune to abrasion, задрал, and scraping.
Its flexural strength generally ranges from 300 руу 600 МПа, relying on processing approach and grain size, and it keeps toughness at temperatures up to 1400 ° C идэвхгүй орчинд.
Fracture strength, while modest (~ 3– 4 MPa · m 1ST/ TWO), is sufficient for lots of architectural applications, specifically when integrated with fiber support in ceramic matrix composites (CMCs).
SiC-based CMCs are utilized in turbine blades, combustor linings, and brake systems, where they provide weight cost savings, gas efficiency, and prolonged service life over metallic equivalents.
Its exceptional wear resistance makes SiC perfect for seals, bearings, pump elements, and ballistic shield, where sturdiness under extreme mechanical loading is critical.
3.2 Thermal Conductivity and Oxidation Security
One of SiC’s most useful residential or commercial properties is its high thermal conductivity– ойролцоогоор 490 W/m · K for single-crystal 4H-SiC and ~ 30– 120 W/m · K for polycrystalline types– going beyond that of lots of metals and making it possible for effective heat dissipation.
This residential property is important in power electronics, where SiC devices generate much less waste heat and can run at greater power densities than silicon-based gadgets.
At raised temperature levels in oxidizing environments, SiC creates a protective silica (SiO ₂) layer that reduces additional oxidation, offering good ecological sturdiness as much as ~ 1600 ° C.
Гэсэн хэдий ч, in water vapor-rich atmospheres, this layer can volatilize as Si(Өө)₄, resulting in accelerated degradation– a key challenge in gas turbine applications.
4. Advanced Applications in Energy, Electronic Devices, and Aerospace
4.1 Power Electronic Devices and Semiconductor Gadgets
Silicon carbide has transformed power electronics by making it possible for gadgets such as Schottky diodes, MOSFETs, and JFETs that operate at higher voltages, frequencies, and temperatures than silicon matchings.
These tools lower energy losses in electric vehicles, renewable energy inverters, and commercial electric motor drives, adding to global power efficiency enhancements.
The capability to run at junction temperature levels over 200 ° C permits streamlined cooling systems and raised system reliability.
Цаашлаад, SiC wafers are utilized as substratums for gallium nitride (GaN) epitaxy in high-electron-mobility transistors (HEMTs), integrating the advantages of both wide-bandgap semiconductors.
4.2 Nuclear, Сансар огторгуй, and Optical Equipments
Атомын цахилгаан станцуудад, SiC is a key element of accident-tolerant fuel cladding, where its reduced neutron absorption cross-section, radiation resistance, and high-temperature toughness improve safety and security and efficiency.
Агаарын сансарт, SiC fiber-reinforced composites are used in jet engines and hypersonic cars for their lightweight and thermal stability.
Цаашлаад, ultra-smooth SiC mirrors are utilized precede telescopes as a result of their high stiffness-to-density proportion, дулааны тогтвортой байдал, and polishability to sub-nanometer roughness.
Товчхондоо, silicon carbide ceramics stand for a keystone of modern advanced materials, combining outstanding mechanical, дулааны, and digital properties.
With specific control of polytype, microstructure, and handling, SiC remains to enable technological innovations in power, transport, and extreme setting engineering.
5. Нийлүүлэгч
TRUNNANO бол бөмбөрцөг гянт болдын нунтаг нийлүүлэгч юм 12 нано барилгын эрчим хүч хэмнэх, нанотехнологийг хөгжүүлэх чиглэлээр олон жилийн туршлагатай. Энэ нь зээлийн картаар төлбөрийг хүлээн авдаг, Т/Т, West Union болон Paypal. Труннано бараагаа FedEx-ээр дамжуулан гадаад дахь үйлчлүүлэгчдэд хүргэх болно, DHL, агаараар, эсвэл далайгаар. Хэрэв та бөмбөрцөг гянт болдын нунтаг талаар илүү ихийг мэдэхийг хүсвэл, Бидэнтэй холбоо барьж, лавлагаа илгээнэ үү([email protected]).
Шошго: silicon carbide ceramic,silicon carbide ceramic products, industry ceramic
Бүх нийтлэл, зургийг интернетээс авсан болно. Зохиогчийн эрхийн асуудал байвал, устгахын тулд бидэнтэй холбоо барина уу.
Биднээс асуугаарай