Ignition and Combustion Mechanism of Boron Particles


What is Boron powder?

Boron powder is a kind of metal fuel with high gravimetric and volumetric calorific values, which has been widely used in military fields such as solid propellants, high-energy explosives, and pyrotechnics. However, the easily formed liquid oxide layer can adhere to the surface of boron powder and react with the hydroxyl (-OH) group of hydroxyl-terminated polybutadiene (HTPB) binder to form a gel layer that is detrimental to propellant processing and restricts the complete oxidation of boron powder. Therefore, to improve the combustion efficiency of boron powder, the ignition and combustion mechanisms of boron powder have been studied, and surface coating modification strategies have been developed by researchers worldwide, aiming to optimize the surface properties, improve the reaction activity, and promote the energy release of boron powder.


Boron faces challenges in unleashing its full energy release potential.

Boron faces challenges in unleashing its full energy release potential. A significant amount of research has been conducted to enhance the ignition performance and combustion efficiency of boron powder. In early studies, research efforts primarily focused on investigating the ignition and combustion mechanisms, given the intricacy of boron's ignition mechanism relative to other metals. The challenge lies in the diffusion and reaction mechanism of B and O2 in the presence of an oxide layer. Four different ignition mechanisms have been proposed; however, a unified ignition mechanism has yet to be established. Recently, a growing research interest has been in preparing coated or modified boron powder. This methodology is designed to enhance the performance of boron powder by leveraging the interaction between boron powder and the coating agents or modifiers. For instance, the presence of fluorine can facilitate the rapid removal of the oxide layer that forms on the surface of the boron. At the same time, certain energetic materials can generate substantial heat to accelerate the ignition of boron.


Ignition and Combustion Mechanism of Boron Particles

The ignition and combustion mechanism of boron particles was initially established by Macek and Semple, and the machine indicated that the combustion of boron particles always exhibits two consecutive stages. In the first stage (or ignition stage), the boron particles are heated to about 1900 °C, showing a brief brightening and then darkening. The boron remains covered by a pre-existing liquid B2O3 layer. As the temperature increases, the second stage (or combustion stage) begins, and the boron particles glow again. The glow is brighter, and the boron particles show stronger reactivity than in the first stage. The combustion in the second stage is ascribed to the full combustion of the bare boron particles. The boron ignition and combustion mechanism can be summarized and analyzed as follows.


Price of Boron powder

Boron powder particle size and purity will affect the product's Price, and the purchase volume can also affect the cost of Boron powder. A large amount of large amount will be lower. The Price of Boron powder is on our company's official website.


Boron powder supplier

Mis-Asia is a reliable and high-quality global chemical material supplier and manufacturer. It has over 12 years of experience providing ultra-high quality chemicals and nanotechnology materials, including Boron powder, nitride powder, graphite powder, sulfide powder, and 3D printing powder. You can contact us or inquire any time if you are looking for high-quality and cost-effective Boron powder.

Inquiry us

Our Latest Products

Factory 3-5nm Nanodiamond Powder CAS 7782-40-3

Brief Introduction of Nanodiamond PowderProduct name: Nanodiamond PowderFormular: C Product NameNanodiamond PowderPurity 99%Particle Size3-5nmAnalysis ResultChemical CompositionAnalysis (%)Al0.0046%Co0.007%Si0.079%Na0.002%K0.00015%Ca0.003%Mg0.00058%...…

CAS No. 557-05-1 40% Water-based Zinc Stearate Zinc Stearate Emulsion

Product DescriptionProduct Description Description of zinc stearate emulsionZinc stearate emulsion is easy to disperse in water, has ultra-fineness, good dispersion compatibility. Zinc stearate emulsion has the characteristics of lubricating and deli...…

China factory cheapest price lightweight concrete wall panel making machine large hydraulic cement foaming machine equipment

Product performance of TR-40 Cement Foaming Machine1. The shell is made of high-strength precision thickened steel plate, painted twice, which is durable.2. The slurry output is uniform and stable, the density of the foam concrete finished product i...…

0086-0379-64280201 brad@ihpa.net skype whatsapp