Zirconium Diboride Ceramics

What is Zirconium Diforide? Zirconium hydroboride The chemical formula for Zirconium diboride is ZrB2. Zirconium Diboride can be described as a type of covalent high refractory ceramic having a hexagonal crystal.
ZrB2 can be used as an ultra-high-temperature ceramic (UHTC), with a melting temperature of 3246°C. Its combination with its low density, 6.09 g/cm 3, and excellent high-temperature stability makes it suitable for high-temperature aerospace applications like rocket propulsion systems or hypersonic flight.
It's an uncommon ceramic that has high thermal and electric conductivity. This is similar to the hafnium and isomorphic Titanium.

ZrB2 parts can be hot-pressed, which means that they are heated to a powder before being machined. Covalentity of ZrB2 and surface oxides can cause problems in ZrB2 sintering. This causes grain to become coarser before it is densified during sintering. While pressureless ZrB2 can boost the sintering force via the reaction between sintering additions carbon and boron with surface oxidess, the mechanical properties of hot-pressed ZrB2 will be less.

You can add 30 vol% SiC (ZrB2) to increase the oxidation resistance. The protective oxide layer is very similar to protective alumina.

ZrB2 is used for ultra-high-temperature ceramic matrix composites (UHTCMCs).

Zirconium Diboride ZrB2 Ceramics
The high melting points and high conductivity of zirconium-diboride ceramics make them a valuable resource for nuclear control materials and composites.
Additionally, it is more conductive than many other ceramic materials. It can also be used in wire cutting to create complex-shaped parts.

Zirconium Diboride Uses
1. Material used for refrigeration
ZrB2 is a great special refractory substance that can be used to make casting molds, high-temperature temperature thermocouple protector bushings, and the crucible for metallurgical material. The airtightness and conductivity of ZrB2 ceramic are not great when it is used for thermocouple shielding. It must be combined to an aluminum oxide outer casing in order to perform temperature measurement. You can use the thermocouple sleeves of this material in brass and molten steel melt for long periods. ZrB2 ceramics may also be used in refractories as antioxidants.
2. Materials for electrode
ZrB2 can be used for electrode materials and electric contact materials due to its electronic conduction mechanism and low resistance. A casing thermocouple material was developed in 1994 by researchers that is paired ZrB2 with graphite. The ability to work under an oxygenating atmosphere (1200-1600) has been demonstrated by experiment. A large value thermocouple, at 70 mV at 1600 is possible, as well as a very high thermoelectric potential rate. The thermocouple can be used to measure temperature in special circumstances where a metal thermocouple or radiation thermometer is not available.
3. Andere
ZrB2 has an excellent wear resistance and is used for cutting tools. ZrB2 is a highly resistant material that has attracted a lot of attention due to the fact it can withstand corrosion.

Zirconium Diboride Supplier
Mis-asia Technology Co. Ltd., (Mis-asia), is a reliable global supplier and manufacturer of chemicals. With over 12-years experience, Mis-asia has been providing high-quality chemical products. This includes silicon powder, graphite dust, zinc sulfide powder, calcium nitride as well as 3D printing powder.
We can help you find high-quality Zirconium Diboride ZrB2 Powder. Please contact us to send us an enquiry. (brad@ihpa.net)

Inquiry us

Our Latest Products

Factory 3-5nm Nanodiamond Powder CAS 7782-40-3

Brief Introduction of Nanodiamond PowderProduct name: Nanodiamond PowderFormular: C Product NameNanodiamond PowderPurity 99%Particle Size3-5nmAnalysis ResultChemical CompositionAnalysis (%)Al0.0046%Co0.007%Si0.079%Na0.002%K0.00015%Ca0.003%Mg0.00058%...…

CAS No. 557-05-1 40% Water-based Zinc Stearate Zinc Stearate Emulsion

Product DescriptionProduct Description Description of zinc stearate emulsionZinc stearate emulsion is easy to disperse in water, has ultra-fineness, good dispersion compatibility. Zinc stearate emulsion has the characteristics of lubricating and deli...…

China factory cheapest price lightweight concrete wall panel making machine large hydraulic cement foaming machine equipment

Product performance of TR-40 Cement Foaming Machine1. The shell is made of high-strength precision thickened steel plate, painted twice, which is durable.2. The slurry output is uniform and stable, the density of the foam concrete finished product i...…

0086-0379-64280201 brad@ihpa.net skype whatsapp