High Purity 3D Printing Powder 15-5 Stainless Steel Powder

About the 3D Printing 15-5 Stainless Steel Powder: Stainless 15-5 metal powder can be used for 3D printing of thin-walled parts and devices, cold and hot spraying, laser cladding and biomedical applications. Stainless Steel PH 15-5 is a martensitic, precipitated stainless steel that has excellent corrosion resistance and mechanical properties.

This stainless steel is pre-alloyed and fine powder. This steel is known for its good mechanical properties and corrosion resistance, especially when it’s in the precipitation-hardening stage. This type is used widely in medical, aerospace, engineering and other applications where corrosion resistance and high hardness are needed.

In metal injection molding, precipitation hardening is the most commonly used alloy. Cu tends to evaporate when sintering, which is one of its potential disadvantages. It may be necessary to clean the oven regularly in order to prevent cross-contamination. The current study of 15-5pH has been initiated in part with this aspect in mind.

It is a martensitic, precipitate-hardened stainless alloy containing 15 chromium. It has a high degree of strength, hardness, and corrosion resistance. Heat treatment at low temperatures can increase the strength. It is stronger and more malleable than 17-4 pH. It welds well. It can be used in this level for any number of different thermal conditions. If you are interested in purchasing 3D Printing Powder Stainless Steel Powder, 15-5, in bulk quantities, please send us an inquiry.

Category of Stainless Steel Powders:

Alloy grades & Characteristics

Alloy number of Stainless Steel dust:

Stainless steel:304,316L,410L,15-5PH,17-4PH,2Cr13;

High-strength steel:A100,300M,30CrMnSiA,40CrMnSiMoVA;

Work die steel:18Ni300,H13,M2,M35,M42,T15,2030,S390

Iron Nickel Alloy Powder: Invar 36

The particle size of Stainless Steel powder is:

0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm

Morphology and morphology of Stainless Steel powder

Spherical or near spherical

The appearance of Stainless Steel Powder

Grey

Package of Stainless Steel Powder:

Aluminum bag, Vacuum packing

Application of Stainless Steel:

3D printing powder

Other uses for Stainless Steel powder

powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.

The 17-4PH stainless is improved by the 15-5PH. This finer structure was achieved by the remelting procedure. This delicate structure increases the toughness. The material has excellent corrosion resistance and is suitable for many different industries. It can be processed either in the solution annealing stage or final heat-treatment state. Heat treatment at different temperatures improves the strength and ductility.

Any conditions are acceptable for processing 15-5PH. First, the alloy is slightly formed under the conditions for averaging. Then, it is welded by using techniques such as protection fusion or resistance method. The material was heated at 1038degC (1900degF), for 1/2 hour, and then cooled in air. It is then followed by annealing the alloy at 1038degC for 1 hour and cold working.

Applications Stainless Steel Powder 15-5 for 3D Printing

15-5PH stainless may be used for heating or resolving treatment conditions in order to obtain various properties. The stainless steel can be treated in many different ways, but the H1150m treatment conditions provide the longest life.

Applications: aerospace parts, aircraft manufacturing, component manufacturing and other equipment.

Here are some more applications of stainless steel 15-5:

The marine gas compressor section

Hollow shaft,

Papermill equipment

Engine parts

Aircraft parts

gear

Fittings & fasteners

Nuclear reactor assembly

Aerospace structural components

The valve

The gear and shaft

Components for oil and gas

Nuclear reactor assembly

Storage Condition for 15-5 Stainless Steel powder:

As dampness will affect the performance of 15-5 powder and its use, it is important to store 15-5 stainless-steel powder in a dry and cool room. Ti2AlC Powder should not be exposed to stress.

Shipping & Packing of 15-5 Stainless Steel Powder

The amount of powder 15-5 stainless is used to determine the type of packaging.

15-5 stainless powder packaging: Vacuum packed, 100g/bag, 500g/bag or 1kg/bag. 25kg/barrel or as per your request.

15-5 stainless powder can be shipped by air or sea as soon after payment as possible.