Sunday, July 14, 2024
nanotrun.com
HomeMaterialsCarbide powderHigh Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

Tungsten carbide, a mixture of tungsten (and carbon), is an organic compound. The molecular formula of tungsten carbide is WC, and its molecular weight is 195.85.
Particle Size: -325mesh

Purity: 99%


About Tungsten Carbide WC Powder:



Tungsten carbide

This is a combination of tungsten, carbon and other elements.

Tungsten carbide formula

Is the WC?

Tungsten carbide


molecular Weight

It is 195.85


Tungsten carbide color:

Although the most basic form is a grayish powder, it can still be used in cutting and jewelry tools.

Young’s modulus, which measures 530-700 GPa (77,000-102,000 ksi), is approximately twice as stiff than steel. It is also twice as dense and nearly equal to lead or gold. Its hardness is almost the same as that of corundum, a-Al2O3. Only diamond powder and cubic boron Nitride can be used to polish and finish.

Tungsten caride can be also used in the production of

tungsten carbide rings

,

tungsten carbide mens rings

,

tungsten carbide wedding bands

,

tungsten carbide mens wedding bands,

etc. Because

tungsten carbide rings price

Tungsten carbide rings are less costly than gold and platinum rings. It also has a greater scratch resistance than any other metal. There is a variety of styles and colors available, as well as inlays and inlays.

black tungsten carbide rings

,

tungsten carbide rings gold

.


Black tungsten carbide

This hexagonal crystal has metallic luster, hardness and resemblance to diamonds. Tungsten carbide is an excellent conductor of heat and electricity. Tungsten carbide can’t be dissolve in water or hydrochloric and sulfuric acids. However, it is easily soluble and dissolves in hydrofluoric and nitric acids. Tungsten carbide in its pure form is very fragile. However, a tiny amount of cobalt, titanium and other metals can reduce the brittleness. Tungsten carbide can be used to cut steel. To increase its anti-knock capability, it is sometimes combined with titanium carbide (or tantalum) or their mix. Tungsten carbide has a chemical stability. Tungsten powder is used for cemented carbide production.

To receive the most current information, send us an inquiry

The price for tungsten carbide

Please fill out the form below if you wish to

buy tungsten carbide

Get powder in bulk


Tungsten carbide powder for WC performance:


These black hexagonal crystals have a melting point of 2870 degrees C, +- 50 degrees C, and boiling point of 6700 degrees C. They can be dissolved in hydrofluoric or mixed acid of nitric acids as well as in aqua regia.


Tungsten carbide powder technical parameters

WC Molecular Weight Total carbon No Carbon O As Bi Ca Cd
99.95 195.86 6.13-6.18 0.05 0.05 0.001 0.0003 0.0015 0.0005
Cr Cu Fe K Mn Na Mo P Pb
0.005 0.0003 0.015 0.002 0.001 0.002 0.003 0.001 0.0003
Sb Si Sn Ti V Ni Co S Al
0.0005 0.0015 0.0003 0.001 0.001 0.005 0.01 0.001 0.001


It is simple.


Tungsten Carbide WC Powder


produced?


Utilizing metal tungsten or carbon as raw material, tungsten powder of an average particle size between 3 and 5 mm is mixed dry with a ballmill, then press-molded and put into a graphite resist furnace. Or, you can heat it to 14001700 using an induction furnace. Preferably 15501650. W2C is produced in the hydrogen stream and reacts at high temperatures to create WC. To make WC, first tungsten Hexacarbonyl must be thermally broken down at between 650 to 1000 C in CO. Next, it will react with carbon monoxide at 1150 degC. W2C is possible at higher temperatures than these.

The chemical reaction formula

2W+C = W2C

W + C = WC

Hydrogenated tungsten trioxide (WO3) is then reduced to make tungsten dust. The average particle size for tungsten powder is 35mm. Next, press-form the mixture of tungsten and carbon black under pressure of approximately 1t/cm2. You will need to heat the block of pressurized material in a graphite pan (or crucible) at about 14001700, or more preferably 15501650 in hydrogen stream. This can be done using pure hydrogen and a low dew point (using a graphite resistance furnace) or induction electric furnace. Carburizing will give you WC. Since W2C can be generated from the beginning of the process, the reaction begins around the tungsten particle. Because the reaction temperature is very low, the unreacted and intermediate W2C will remain. The reaction must then be heated to the high temperatures mentioned above. The raw tungsten particle size should determine the temperature. A reaction can be initiated at temperatures between 1550-1650degC for large particles that have an average size of 150 mm.

The chemical reaction formula

WO3 + W+3H2 – WO3 + W2 + 3H2O

2WO3 + 3C – 2W + 3CO2

2W+C = W2C

W + C = WC


Applicaciones


Tungsten Carbide WC Powder:


Tungsten caride is used extensively in the manufacture of high-speed cutting tools and furnace structural materials. This is used in the manufacture of cutting tools, wear resistant parts, meltingcrucibles for metallics such as cobalt, copper and bismuth and wear-resistant semiconductor film.

Tungsten carbide is used for super-hard material as well as wear-resistant materials.

Tungsten carbide can be combined with many other carbides to create a strong solution. WC-TiC-Co has been used extensively to create cemented carbide tools.

Tungsten carbide can also be used to modify NbC–C and TaC–C ternary-system carbides. It can decrease the sintering temperature while maintaining excellent performance. It is also used in aerospace.

Tungsten carbide or (WC) can be made by using tungsten hydride (WO3), graphite, and an reducing atmosphere at 14001600 degrees Celsius. You can make dense ceramic products by either hot pressing or hot isostatically pressing sintering.

Tungsten caride (WC), powder, can also be used in the production of high-capacity superfine or nano-crystalline horniness alloys.


Tungsten carbide powder storage conditions:


Tungsten carbide powder dispersion and uses effects should be considered. Niobium carbide NbC Powder must be stored in vacuum bags and kept dry in a cool place. NbC powder shouldn’t be exposed to stress.


Packing and Shipping Tungsten carbide WC granules :


We offer many packing options that are dependent on the amount of niobium-carbid NbC powder.

Tungsten carbide WC powder packing:


You can vacuum pack 1kg per bag, 25kg/barrel or according to your requirements.

Tungsten carbide WC powder shipping:


Could be shipped by sea, air or express once payment has been received.

Robocup2009 advanced materials Nano Technology Co. Ltd.

We can provide high-quality, reliable tungsten carbide powder. Please contact us to send an inquiry. (

brad@ihpa.net

)


Tungsten Carbide Properties


Other Titles
tungsten(IV) carbide, WC powder

12070-12-1

Compound Formula
WC

Molecular Weight
195.86

Appearance
Gray Black Powder

Melting Point
2870


Boiling Point
6000


Density
15 g/cm3

Solubility of H2O
N/A

Electrical Resistivity
1 10x O-m

Poisson’s Rate
0.24

Specific Heat
280 J/kg-K

Tensile strength
350 MPa

Thermo Conductivity
85 W/m-K

Thermal Expansion
5.4 um/m-K

Young’s Module
630 GPa

Exact
N/A


Tungsten Carbide Health & Safety Information


Signal word
N/A

Hazard Statements
N/A

Hazard Codes
N/A

Risk Codes
N/A

Safety statements
N/A

Transport Information
N/A




    RELATED ARTICLES
    - Advertisment -
    nanotrun.com

    Most Popular

    Recent Comments