Thursday, December 5, 2024
nanotrun.com
HomeMaterialsCarbide powderHigh Purity Manganese Carbide Mn3C Powder CAS 12121-90-3,99.9%

High Purity Manganese Carbide Mn3C Powder CAS 12121-90-3,99.9%

Manganese carbonide is a stable, manganese-carbon-based compound. Mn3C has the chemical formula and the melting point at about 1520°C. Its density is 6.89g/cm3.
Particle Size: -325mesh

Purity: 99%


About Manganese Carbide Mn3C Powder:



Manganese carbide

It is made from carbon and manganese.

Manganese carbide


formula

What is Mn3C?

Manganese carbide


melting point

It is approximately 1520°C

Manganese carbide


The density

6.89g/cm3. Manganese carbide burns quickly in oxygen, and is decomposed in water to make manganese hydrogenxide and methane. It can be easily decomposed by acid, easy reaction with fluorine and chlorine, and at high temperatures, decomposes into manganese, carbon, and methane.

The heat of the formation of manganese carbide is ^fHm (298K)=-(15.06+-12.55)kJ/mol. The result of smelting manganese-silicon or high-carbon ferromangannese in an electric furnace or blast furnace is manganese carbide. This means that the heat absorption by the reaction will be less than for reduction to metallic manganese, or manganese silicide. It starts

With

It is cold. The high-carbon ferromanganese is therefore more carbon.

To receive the most current information, send us an inquiry

Manganese carbide


Prices

Please fill out the form below if you wish to

buy Manganese Carbide Powder

In bulk.


Manganese Carbide Mn3C powder performance:

Mn3C has the following physical characteristics: Mn3C is a hard crystalline solid, or bright needle crystal. Its relative density is 6.89. Concentrated sulfuric acid or nitric Acid will insulate it. However, water or dilute acids can decompose the metal to create manganese hydroxyide, hydrogen, and other hydrocarbons. It is easily reacted with fluorine or chlorine, and it burns fast in oxygen.


Technical Parameters of Manganese Carbide, Mn3C Powder


Certificate for Mn3C powder
Purity C P S O Get carbon free Size for Particel
>99% 5.91 0.03 0.03 0.3 0.2 D50=11mm, -325mesh


It is simple.


Manganese Carbide Mn3C Powder


produced?


The gas-based reduction manganese oxide is a method of making manganese carbide. Once you have mixed manganese dioxide, water, and binder together, the dry block can be placed in an atmosphere with H2, CH4, CO, and N2. Then, it is calcined at 1100 1300. This will produce manganese carbide products. Here are the specific steps. The mass percent of -325 mesh size refers to 90% analytically purified manganese dioxide, trimanganese troxide and mixed with 0.5% CMC. Finally, pelletization and drying take place. After drying, the sample is placed in an atmosphere of 10% CMC, 30% H2, 10% CO, 50% N2 and at 1150degC for 120min. Then, it’s calcined again in an N2 atmosphere. After cooling down to room temperature the obtained manganese carbide product can be converted into manganese dioxide at 95%.


Applicaciones


Manganese Carbide Mn3C Powder:


Manganese carbonide Mn3C powder can be used to make hard coatings, target, weld materials, and spray tools. It is also used in the steelmaking industry, aerospace, and many other areas.

The grain refiner of Cermet and Wolfen carbide, manganese carbonide has the ability to significantly enhance the properties of an alloy.

Manganese troxide is an important raw material in the manufacture of soft magnetic materials of manganese, zinc ferrite and other electronic materials. This is why it is so widely used.

To prepare transformer oils, you can use manganese carbonide. This is a simple process that can be easily replicated on large scales.


Manganese Carbide, Mn3C powder storage conditions:


Manganese Carbide, Mn3C Powder, should be maintained in a dry, cool, and sealed environment.


Shipping and Packing of Manganese Carbide 3C Powder


You can pack it in two plastic bags with the inside.

Manganese Carbide Mn3C Powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.

Manganese Carbide Mn3C Powder shipping:


Could be sent by sea or air as soon as possible after receipt of payment.

Jatujakguide advanced materials Nano Technology Co. Ltd., (Jatujakguide), is a reliable global supplier and manufacturer. They have over 12 years of experience in manufacturing super-high quality chemicals and Nanomaterials. This includes boride, nitride, graphite, sulfide, 3D printing powders, as well as boride, nitride, graphite, and sulfide.

Send us an enquiry if you’re looking for Manganese Carbide Powder of high quality. (

brad@ihpa.net

)


Manganese Carbide Properties


Other names
trimanganese carbide, trimanganese monocarbide, Mn3C powder

12121-90-3

Compound Formula
Mn3C

Molecular Weight
176.82

Appearance
Gray Black Powder

Melting Point
N/A

Boiling Point
N/A

Density
N/A

Solubility of H2O
N/A

Exact
N/A


Manganese Carbide Health & Safety Information


Signal word
Alert

Hazard Statements
H228-H319

Hazard Codes
F

Risk Codes
N/A

Safety statements
N/A

Transport Information
UN 3089, 4.1/III




    RELATED ARTICLES
    - Advertisment -spot_img

    Most Popular

    Recent Comments