Tuesday, December 3, 2024
nanotrun.com
HomeMaterialsSilicide PowderHollow Glass Sphere, Hollow Glass Beads, glass sphere balls

Hollow Glass Sphere, Hollow Glass Beads, glass sphere balls

Hollow glass balls are hollow spherical powdered inorganic nonmetallic materials with a particle-size of 5-100mm. The wall thickness is 1-2mm. Their compressive strength is 3-125MPa.


The following is a list of the most recent articles about


Hollow Glass Beads Sphere Hollow Glass Beads


:


What is hollow Glass Microsphere?

Microspheres are hollow glass microspheres with a range of diameters from 10 to 30 micrometers. Hollow spheres fill composite materials like lightweight concrete, syntactic elastomer and foam. The hollow spheres can be used to fill lightweight composite materials like syntactic polymer foam and lightweight concrete.

Hollow glass bead

This is a special type of glass bead that is less dense and has a lower thermal conductivity. It’s a new type of micron grade light material, developed in 1950s and 60s. Its primary component is borosilicate. The particle size of the material is 10250mm with a wall thickness 12mm. Hollow glass beads feature high compressive strengths, a high melting temperature, high resistivity and low thermal conductivity.


Hollow glass microspheres

Micro balloons (also known as bubbles) are formed from borosilicate and sodium salt glass mixtures. They have low density, and they’re resistant to heat and chemicals. The walls are made of

Glass microspheres

The spheres are typically rigid and about 10% thicker than their diameter. Spherical particles are available in a variety of densities ranging from 0.06g/c3 to 0.80g/c3, and particle sizes from 5um to180um. The compressive strength is determined by the thickness of the hollowed sphere. This, in turn, is determined by its density.

Hollow glass sphere

Chemically stable, nonflammable, and nonporous. Excellent water resistance. It is a trusted worldwide brand.

Hollow Glass Beads Sphere Hollow Glass Beads


You can also contact us by clicking here.

. Please send us an inquiry regarding the latest

Prices of


Hollow Glass Beads Sphere Hollow Glass Beads

At any time.


Hollow Glass Sphere Hollow Glass beads Product Performance:


Hollow glass microspheres consist of hollow glass microspheres at the micron level with a smoothed surface. It is made up of borosilicate, which is the main chemical component. The sphere is hollow and transparent under an electron microscope. Hollow glass beads possess low density, good strength, resistance to acid and alkali, low thermal conductivity and electrical insulation, among other qualities. These new materials are multifunctional, have high chemical stability and fluidity.


Technical Parameter Hollow Glass Beads Hollow Glass Sphere:

Product Name The following content is available: Particle Size True Density Bulk Density Color
Hollow Glass Sphere Borosilicate glass 5- 100um 0.12-0.70 g/cm3 0.10-0.40 g/cm3 White


How can you tell?


Hollow Glass Beads Sphere Hollow Glass Beads


Produced?



How to make microspheres of glass



1. Glass powder method


In the glass powder method, pre-prepared powdered glass containing SO3 is passed through the flame between temperatures of 1100-1500. Due to the increase in solubility, SO3 as well as other gases in the glass are released from the inside due to the change in atmosphere. A high temperature causes the glass powder to become spherical because of the surface tension. The spillage gases are sealed inside the spherical powder to form hollow glass beads.


2. Spray granulation is a method of granulation.


The spray granulation is done in advance using a solution of sodium silicate aqueous with auxiliary reagents (boric, urea and ammonium pentaborate), then the solution is injected into the dryer. After drying, it is expected to fall to a specific particle size, the final product will be a powder particle heating foam-forming glass beads.


3. Droplet Method


The liquid drop technique uses the same raw material as the spray-granulation method. The raw materials used are 500 copies each of sodium silicate (M(SiO2):M (Na2O =2) and 10% ammonium aqueous solution. The glass beads are then sprayed onto the spray dryer tower after being mixed.


4. Dry gel method


The alkyl sodium was added to dilute Hydrochloric Acid and decomposes with water. After gelation, gel was dried twice at 60°C and 150°C and then crushed in a ball mill. After grading was completed, dried gel powder was obtained. This was then foamed up in an electric vertical furnace at 1280.


Applications


Hollow Glass Beads Sphere Hollow Glass Beads


:


Hollow glass microspheres have many applications, including glass fiber reinforced products, composite foam, artificial wood, compound, atomic-ash, buoyancy in deep sea, bowling material, low-density concrete, sealing material and lightweight. They are also used by the resin industry for handicrafts such as wall plates, sandwich layers of lightweight packaging materials.

Hollow glass microspheres are also coated to provide a conductive surface. Conductive coatings optimized in thickness give spherical materials excellent shielding and conducting properties while maintaining weight savings. These conductive microbubbles can be used for a variety of applications including military, biotechnology, electronic, medical and other industries.

Hollow glass beads can reduce weight and improve sound insulation. The products are also resistant to cracking and have good reprocessing properties. It is used in the manufacture of composite materials like wood, engineering plastics, rubber, FRP and artificial marble.


Packing & Shipping Hollow Glass Sphere Hollow Glass Glass Beads


The packing we offer is dependent on the number of hollow glass balls.

Hollow glass spheres packaging:


1kg/bag; 25kg/barrel or 200kg/barrel

Hollow glass spheres for shipping


As soon as payment is received, you can ship your order by air or sea.

Technology Co. Ltd., () is an established global chemical supplier and manufacturer, with over 12 years’ experience in the supply of super-high-quality chemicals, such as boride powders, nitride particles, graphite particles, sulfide particles, 3D printing materials, etc.

Looking for high quality

Hollow Glass Microspheres

Send us a message or feel free contact us. (

brad@ihpa.net

)


Hollow Glass Spheres Properties


Alternative Names
Hollow Glass Beads

CAS Number
N/A

Compound Formula
N/A

Molecular Mass
N/A

Appearance
White Powder

Melting Point
N/A

Boiling Point
N/A

Density
0.12-0.70 g/cm3

Solubility In H2O
N/A

Exact Mass
N/A


Hollow Glass Spheres Health & Safety Information


Sign Word
N/A

Hazard Statements
N/A

Hazard Codes
N/A

Risk Codes
N/A

Safety Declarations
N/A

Transport Information
N/A




    RELATED ARTICLES
    - Advertisment -spot_img

    Most Popular

    Recent Comments