Thursday, April 18, 2024
HomeMaterialsStearic Acid SeriesHigh Quality Water-Based Boron Nitride Emulsion

High Quality Water-Based Boron Nitride Emulsion

A water-based, organic high-temperature oil lubricating substance is the water-based Boron Nitride Emulsion. It doesn’t bond with or infiltrate molten metallic liquids and it can protect surfaces of refractory material or ceramic utensils.

About Water Based Boron Nitride Emulsion Water Based Boron Nitride Coating. Water-based coatings have excellent lubrication properties and are easy to remove. The high-purity BN base material is used to create the coating. High-temperature bonding is also employed. The combination of high-purity boron dioxide particles with an inorganic binder creates a superior formulation that can produce a fluid, continuous coating on the surface. This allows for excellent adhesion. Also known as the boron nutride lubricant or boron coating.

Boron Nitride coating, an inert organic high-temperature grease, is a non-corrosive, inorganic lubricating substance that doesn’t bond with or infiltrate molten iron. The coating protects ceramic vessels and other refractory materials from direct contact with the molten zinc, aluminum, magnesium and zinc alloy. This can greatly enhance this type of utensils. Life.

Hexagonal boron Nitride suspension is highly thermally conductive. You can apply it directly to any hot surface, regardless of whether or not you have impregnated molten metallic. It does not react to metal, glass and molten salt. Boron nitride coateds can be easily brushed with liquid. The concentration of the coating can then be adjusted to spraying or dipping by adding water. If you are interested in purchasing Water-Based Boron Nitride Emulsion, please send us an inquiry.

Properties Water-Based Boron Nitride Emulsion:

Water-based Boron Nitride Emulsion does not pollute the environment or cause harm to human health. Non-toxic, no odor. Boron Nitride coating is heat resistant up to 400-1700. This coating is water resistant, resists salt spray and organic solvents.

How Water Based Nitride Emulsion is made?

Use a gentle brush to apply the paint. You can dilute the paint with distilled water if it is necessary to discolor it.

Spraying: A spray gun, or another similar tool with a pressure between 50-60psi (0.335-0.42MPa), is used. Mix the paint well before spraying. Use distilled water to dilute the paint if it is necessary.

Dip coating technique: Use distilled water to dilute the solution if necessary. After two dips it should be dried for forty minutes at 80 degrees Celsius.

Water Based Boron Nitride Emulsion

The emulsions of aqueous Boron Nitride have been extensively used in the aerospace, military, and petrochemical industries. They can be used for high-temperature steampipe, chimney flue and heat exchanger.

Boron Nitride Emulsion is suitable for use in the following fields: aluminum, magnesium, zinc, other alloy casting, gravity/low -pressure casting, forging and powder metallurgy.

Boron Nitride Emulsion can be used on the casting table, distribution, casting launder and casting table lining. It is also applied on filter box, adapter plate and cast-rolling material. life;

Fine impurities are prevented from getting into the molten material by the boron-nitride-emulsion. It greatly improves the product’s quality and reduces the risk of secondary pollution.

Boron nitride Emulsion provides excellent lubricity in high temperature environments and has an exceptional anti-oxidation capability. Even at extreme high temperatures it maintains its unique non-stick, antisticking, anti-corrosion and antioxidation properties.

Other than protecting various refractory material, boron-nitride-emulsions have outstanding anti-chemical and antiadhesion properties in other fields.

It is impossible for most molten and salt metals to make the boron nutride emulsion wet.

Boron nitride Emulsion resists molten and light metal corrosion.

Very good separation/unusual color in boron-nitride Emulsion.

The Boron Nitride Emulsion is used to extract solidified metal.

Technical Information of Water-Based Boron Nitride Emulsion:

Name of Product Boron Nitride Emulsion
Chemical Formula BN
Appearance White Emulsion
Solid Content 10-12%
PH 7-8
Particle Size: D50 <=10um
Density 0.8-1.0 g/cm3 (25)
Viscosity <=500 mpa.s (25)

Packaging and shipping of water-based Boron Nitride Emulsion

Many types of packing are available depending on the Water-based Borion Nitride Emulsion amount.

Packing of water-based Boron Nitride Emulsion

25 kg/barrel

Shipment of water-based Boron Nitride Emulsion

The payment receipt will be used to send the order by mail, air or express.

Boron Nitride Emulsion Properties

Other Titles
Boron Nitride Emulsion.


Compound Formula

Molecular Weight

White Emulsion

Melting Point

Solubility In Water

0.8-1.0 g/cm3 (25)


Particle Size

Boling Point

Specific Heat

Thermo Conductivity

Thermal Expansion

Young’s Module

Exact Mass


Boron Nickel Emulsion Safety and Health Information

Safety Notice

Hazard Statements

Flashing Point

Hazard Codes

Risk Codes

Safety statements


Transport Information


    - Advertisment -

    Most Popular

    Recent Comments