What’s the purpose of Ti3AlC2 and how does it work?
Ti3AlC2
Has a high degree of oxidation resistance and self-lubrication. It also has excellent room temperature fracture toughness, conductive properties, as well as high levels of self-lubrication. You can use it as a high-temperature structural material, an electrode brush material, chemical anticorrosion and high temperature heating body. They are used primarily in MXene precursor and high-temperature coating.
MAX Phase Material, Aluminium titanium carbide
Aluminum titanium carbide (MAX) is the phase. MAX phase materials have many benefits that combine ceramic and metal, such as low density and high modulus. Because of its crystal structure, the MAX phase has an enhanced elastic modulus and greater strength due to the covalent bonding between the MX and A atomic surfaces. Contrary to this, the weak binding of the MX lamelayer with the A atomic surface results in a lower shear moduleus. Continuous thickening occurs in the MAX phase. A MAX phase ceramic materials with higher modulus can be obtained through the thicknesses of MX sheets layers. The material should be high-temperature-stable and have excellent mechanical properties. A material’s ability to form dense protective oxide films in high temperature oxidation (e.g. silica) will greatly impact its antioxidant potential. Due to selective oxidation, Al can create a continuous Al2O3 protective coating during the oxidation procedure of aluminium titan carbide (Ti3AlC2). Experimental results show that Aluminium titanium carbide, Ti3AlC2, has excellent anti-thermal cycling ability. The produced oxide film is very dense, and it combines well with the matrix. It does not peel off. Ti3SiC2’s oxide film of titanium silicon carbide is broken into two layers. One layer is TiO2, the other is TiO2 mixed with SiO2. Good matrix adhesion and tightness of the oxide film. MAX Phase’s appearance mainly includes block, powder and film. Its appearance and morphology are affected by the preparation process. You can prepare the powdered MAX Phase in a vacuum at high temperatures. The bulk MAX Phase material can also be obtained with thermal pressure (HP), and thermal isostatic (HIP). PVD is used to produce the thin-film MAX Phase material. It has been demonstrated that the MAX Phase can be produced in industrial settings. For large industrial scale production, however, pressure-free Sintering of pure Powder is better.
Aluminum titanium carbide (MAX) is the phase. MAX phase materials have many benefits that combine ceramic and metal, such as low density and high modulus. Because of its crystal structure, the MAX phase has an enhanced elastic modulus and greater strength due to the covalent bonding between the MX and A atomic surfaces. Contrary to this, the weak binding of the MX lamelayer with the A atomic surface results in a lower shear moduleus. Continuous thickening occurs in the MAX phase. A MAX phase ceramic materials with higher modulus can be obtained through the thicknesses of MX sheets layers. The material should be high-temperature-stable and have excellent mechanical properties. A material’s ability to form dense protective oxide films in high temperature oxidation (e.g. silica) will greatly impact its antioxidant potential. Due to selective oxidation, Al can create a continuous Al2O3 protective coating during the oxidation procedure of aluminium titan carbide (Ti3AlC2). Experimental results show that Aluminium titanium carbide, Ti3AlC2, has excellent anti-thermal cycling ability. The produced oxide film is very dense, and it combines well with the matrix. It does not peel off. Ti3SiC2’s oxide film of titanium silicon carbide is broken into two layers. One layer is TiO2, the other is TiO2 mixed with SiO2. Good matrix adhesion and tightness of the oxide film. MAX Phase’s appearance mainly includes block, powder and film. Its appearance and morphology are affected by the preparation process. You can prepare the powdered MAX Phase in a vacuum at high temperatures. The bulk MAX Phase material can also be obtained with thermal pressure (HP), and thermal isostatic (HIP). PVD is used to produce the thin-film MAX Phase material. It has been demonstrated that the MAX Phase can be produced in industrial settings. For large industrial scale production, however, pressure-free Sintering of pure Powder is better.
The cost of Ti3AlC2
There are many factors that affect the price of Ti3AlC2 pureness. Ti3AlC2 market prices are changing constantly. We are available to assist you at all times.
Ti3AlC2 Supplier
Mis-asia (aka. Mis-asia Technology Co. Ltd. (aka. Our company currently has a number of powder material products. You can also order OEM. Please call us or click on the required products to submit an inquiry.
