Saturday, May 18, 2024
HomeMaterialsCarbide powderHigh Purity Zirconium Carbide ZrC Powder CAS 12070-14-3, 99%

High Purity Zirconium Carbide ZrC Powder CAS 12070-14-3, 99%

Zirconium carbonide (ZrC), a refractory ceramic that has a high hardness, is used commercially to make tooltips. Most commonly, it is sintered.
Particle Size: 325mesh

Purity: 99%

Zirconium Carbide Pulver:

Zirconium carbide ZrC

It is used commercially to cut tooltips. It is often sintered.

Zirconium carbide

It is hard.

Zirconium carbide

melting point


Zirconium carbide

Point boiling

Temperature is 5100degC The apparent density of the material is 6.70 g/cm3. Mohs hardness ranges from 8 to 9. Is insoluble with cold water and hydrochloric acids. It dissolves in hydrofluoric and hot concentrated sulfuric, containing either nitric acid (or hydrogen peroxide). At high temperatures, it reacts with chlorine to make zirconium trichloride. It burns at 700°C in the air to create zirconia. You should not mix it with water.

ZrC powder

It is a powder of gray metal with cubic crystal structures. High resistance to corrosion. These interstitial transition metal carides of group IV are members of the ultra-high temperatures ceramics (UHTC). ZrC’s thermal conductivity is 20.5 W/m*K, and its electrical conductivity (resistivity at 43mO*cm) are both similar to zirconium. Due to the strong ZrC covalent bond, ZrC has a very high melting temperature (3530degC), high module (440 GPa), as well as a low hardness (25 GPa). ZrC’s density is 6.73g/cm3 lower than that of other carbides, such as TaC (14.75 g/cm3) and HfC (12.67g/cm3). ZrC appears to be ideal for supersonic or rocket/hyperjet aircraft, which require low density and high temperature load-bearing capability.

As with most carbides from refractory materials, zirconium carbonide is substoichiometric. It contains carbon vacancies. If the content of carbon exceeds ZrC0.98, it is considered free carbon. Between 0.65 and 0.98, the ZrC-to-carbon ratio to metal is stable.

To receive the latest information, send us an inquiry

Zirconium carbide price

Please fill out the form below if you wish to

buy Zirconium Carbide ZrC Powder

In bulk.

Zirconium Carbide Nanoparticles Nano ZrC Pulse Product Performance:

Zirconium carbonide nanoparticles, CAS 12070-14-3, have high purity, small particles, uniform distribution and high specific surface activity. High melting point, high strength, and corrosion-resistant high temperature structural material is Nano ZrC. This powder can absorb visible light efficiently, reflect infrared, and store energy.

Technical Parameter: Zirconium Carbide Nanoparticles NanoZrC Pulp:

Product name MF Purity Particle size Crystal Form SSA The color of the sky
Zirconium Carbide Nanoparticles ZrC 99% 20nm Cubic 11m2/g Black

It is simple.

Zirconium Carbide ZrC Powder


Zirconium carbonide can be made in many different ways. A carbothermal reaction is achieved by zirconia with graphite. This produces powder. By sintering ZrC at temperatures higher than 2000 degrees C, the powder can be transformed into dense ZrC. ZrC powder can also be hot pressed to lower its sintering temperatures, resulting in fine ZrC particles. Full-density ZrC can be made by spark plasma sintering.

You can also make zirconium carbide using solution-based processes. It is done by heating the metal oxide in acetylacetone.

Another method of manufacturing is chemical vapor deposit. It is possible to heat the zirconium sponge, and also decompose the gas halide.

ZrC cannot be used if it has a lower oxidation rate than 800°C. The preparation of composite materials is one way to increase the resistance to oxidation for ZrC. ZrC ZrB2 is a key composite material. ZrC ZrB2-SiC composites are also important. These composite materials are capable of working at temperatures above 1800C. This situation can be improved by using another material, such as TRISO fuel particles as a barrier.


Zirconium Carbide ZrC Powder:

Zirconium carbide is a type of high melting material that has high hardness, excellent heat refractory and high hardness. This material is commonly used to make alloy steel. Also used in the manufacture of zirconium tetrachloride (Zirconium Tetrachloride) and other promising ceramic materials. Zirconium carbonide can be used in an incandescent filament. The main use of zirconium carbide is as an abrasive. This can be used to make cemented carbide.

Zirconium carbonide is a ceramic hard material that can be used for cutting. The zirconium carbonide (ZRC), which is made by sintering has good high-temperature resistance to oxidation, strength, hardness and high thermal conductivity. Additionally, nanopowders of zirconium carbonide (ZrC), exhibit high visible light absorption, great infrared reflection, and have large energy storage capabilities.

Coating material

As refractory coats in nuclear reactors, ZrC is not used. It is less susceptible to radiation damage and has a lower neutron absorption. You can use it as a protective coating on uranium dioxide, OR dioxide particles and nuclear fuel. The superheated chemicalvapor desposition of coatings is usually done in a fluidized-bed reactor. The material has excellent emissivity at high temperatures and high current capacities, which makes it ideal for use in thermo-photoelectric heaters, field emitter tips, and arrays.

Concrete tools

These cemented carbide compound can be used to drill and make other tools with wear resistance because of their hardness. Zirconium carbide, also known as ZrC (zirconium carbide), is a highly-corrosive high-temperature material that has high melting points and strength. This material can be strengthened and resistant to corrosion by using cemented carbide.

Nanostructured parts

Zirconium carbide nanoparticles may be used in nanostructured parts in the metalurgical, chemical, aerospace and other industries. The textile industry can use it to produce nylon, fiber, and carbide thermostatic fabrics. They are also used in composites for metal substrates and ceramics.

Transport and packing of Zirconium Carbide Nanoparticles Nano ZrC Pulp:

We offer many packing options that are dependent on the quantity of zirconium-carbid nanoparticles.

Zirconium carbide nanoparticles packing:

You can vacuum pack 1kg/bag, 25kg/barrel or according to your requirements.

Shipment of Zirconium Carbide Nanoparticles

After receipt of payment, items may be shipped by sea or air as soon as they are possible.

Whatsontianjin advanced materials Nano Technology Co. Ltd., (Whatsontianjin), is a reliable global chemical material supplier and manufacturer. With over 12-years of experience, Whatsontianjin has been providing high-quality chemicals, Nanomaterials, such as boride, nitride, graphite, sulfide, 3D printing powders, and others.

We can provide high-quality zirconium carbonide powder. Please contact us to send us an inquiry. (


Zirconium Carbide Properties

Other Titles
zirconium(IV) carbide, methylidynezirconium, ZrC powder


Compound Formula

Molecular Weight

Gray Powder

Melting Point

Boiling Point

6.73 g/cm3

Solubility of H2O


Zirconium Carbide Safety & Health Information

Signal word

Hazard Statements

Hazard Codes
F, Xn

Risk Codes

Safety statements

Transport Information
UN 3178 4.1/PG2

    - Advertisment -

    Most Popular

    Recent Comments