Friday, July 12, 2024
HomeNewsAsiaIntroduction to Titanium Carbide TiC Powder

Introduction to Titanium Carbide TiC Powder

The Introduction of Titanium Carbide TiC Powder

Titanium carbide or TiC is a common transition metal carbide with a NaCl cubic crystal structure. high melting point, hardness with a high Young’s modus, high durability chemically, wear as well as corrosion resistant as well as excellent electrical conductivity and thermal conductivity. Thus, it is suitable for numerous uses and a huge potential for cutting tools for aerospace, components for aerospace, resistant coatings for wear, foam ceramics, and infrared radiation ceramics materials.

applications of Titanium Carbide TiC Powder

1. Made up of various multiphase materials

Titanium carbide Ceramics are part of extremely hard tool materials, TiC and TiN including WC, TiN, and other raw materials composed out of multi-phase ceramics These ceramics have a very high melting temperature, high hardness and excellent chemical stability. It is the best material for cutting tools and wear-resistant parts and also they offer excellent electrical conductivity and are the most preferred material for electrodes.

Cutting tool material: Because of the percentage of TiC dispersion of hard particles in the matrix, the cutters made from composites are not just improve the toughness however, to a some extent, enhance the strength of the fractures, much higher than the raw tool’s cutting performance by quite a bit. A12o3-tic ceramics can use as armor materials. A tool material its hardness is superior to (C, N) and Ti(C, N) due to N. To ensure that it is used on steel and other cutting materials, the friction coefficient much lower. Many advantages are associated with cutting. Combining the advantages of Ti and (C N, C) to create multiphase materials, a highly effective tool material can easily be made.

2. Used as coating materials

Diamond coating: This manufacturing method of diamond tools is typically the impregnation of powder metal using the method. Due to the high the interfacial force between diamond and any general metal, the diamond’s surface cannot be infiltrated by metal or alloy with a lower melting point and its bonding performance is poor. Recent years have seen many researchers have conducted a great deal of studies on increasing the strength of bonds between diamond and metal matrix. The method of active metal is the most commonly used approach, that is adding some titanium in the bond of metal, vanadium, chromium and others that are active, and tool for sintering liquid phase which is the active metal. The active metal has made up of high carbon compounds. These form the elements and the affinity for diamonds is enormous, and allows for the enhancement of diamond’s surface to enable the metallurgical interaction of diamond and metal bond. However, the strength at the interface is affected by the amount of active metal, sintering temperature in addition to other parameters. It requires removal of the binder in order to ensure the enrichment and enlargement of active metal at the interface due to the fact that this method is not appropriate for hot pressing sintering of diamond and metal powder in a very short solid phase.

3. For preparing foam ceramics

A filter, ceramics effectively removes inclusions throughout all types of fluids and their filtration method is agitation and adsorption. The filter requires the chemical stability of the material particularly in the metallurgical field with a high melting filter, so this type of material can be used to remove oxide most of the time, but it also has the ability to adjust to the filter of metal melt, the principal goal with respect to resistance against thermal shock. Titanium carbide-based foam ceramics have superior strength, harderness, electrical conductivity and heat plus corrosion and heat resistance that oxide foam ceramics.

4. For use in infrared radiation materials

Titanium carbide can be described as a kind of intermetallic compound, usually has good chemical stability, no change of valence state as well as the system is subject to high temperature reduction of preparation of samples, parts of titanium ions are prone to delay appearing, in the hope of the solid of titanium ions melting into the structure of the cordierite position and change in the structure. Comparing to a single-material it is more effective in radiation. the material close to 3tma is definitely improved, which is perfect for use in the field of high temperature.

Main Supplier of Titanium Carbide TiC Powder

We are a respected chemical material supplier in the world and a manufacturer with over 12 years of experience manufacturing high-end chemicals and Nanomaterials like silicon powder magnesium sulfide powder, graphite, calcium tritium, 3D-printing powder and others.

If you’re searching for top-quality titanium carbide TiC-C Powder contact us today. call us or send us an inquiry. (

- Advertisment -

Most Popular

Recent Comments